Serviceline Industrial Sensors
Serviceline Explosion Protection

Magnetic field sensor MB-F32-A2-V1

  • For mounting on a hydraulic cylinder
  • Detects the piston position through the cylinder wall
  • Suitable for magnetic, hydraulic cylinders made of steel

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  MB-F32-A2-V1

General specifications
Switching functioncomplementary
Output typePNP
Installationon the cylinder
Output polarityDC
Switching rangetyp. 50 mm
Nominal ratings
Operating voltage10 ... 30 V DC
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 1.5 V
Operating current0 ... 100 mA
No-load supply current≤ 30 mA
Functional safety related parameters
MTTFd739 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED indicatorred: switching state output 1
yellow: switching state output 2
Approvals and certificates
EAC conformityTR CU 020/2011
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector M12 x 1 , 4-pin
Housing materialPolyamide (PA)
Sensing facePolyamide (PA)
Degree of protectionIP67

Associated Products: MB-F32-A2-V1


Female cordset, M12, 4-pin, PUR cablefa

Female cordset, M12, 4-pin, PUR cablefa