Serviceline Industrial Sensors
Serviceline Explosion Protection

Diagnostic Manager DTM-FC.AD*

DTM-FC.AD*
  • Software user interface for Advanced Diagnostic Modules
  • Simultaneous access to all ADMs of a plant
  • Embedded expert system gives pointed advice in clear text
  • Includes Commissioning Wizard, data historian, oscilloscope...
  • For FOUNDATION Fieldbus H1 and PROFIBUS PA
  • Automatic setup of diagnostic system

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  DTM-FC.AD*

Product Description
User-Interface for Advanced Diagnostics, Professional Edition
Software
Hardware requirementsPC with 1 GHz processor and at least 512 MByte RAM
Operating systemWindows 7, VISTA and XP, each with Microsoft .NET Framework 1.1 and PACTwareTM 3.6/4.0
LanguagesEnglish
LicensingNew plant licenses:
DTM-FC-AD for production process plants with up to 100 segments
DTM-FC-AD.1 for more than 100 segments
Upgrade licenses:
DTM-FC-AD.UPG upgrade of existing DTM-FC-AD
DTM-FC-AD.1.UPG upgrade of existing DTM-FC-AD.1
Expert SystemBuilt-in expert system interprets behavior of each segment based on rules and gives pointed information in clear text. Precisely diagnosis causes and suggests remedies, which are easy to understand.
Physical Layer DiagnosticsBulk power health, segment voltage and current, unbalance, noise, signal level, signal polarity, jitter
Commissioning WizardGenerates reports on physical layer and communications data per device or segment. Automates repetitive tasks during commissioning.
Snapshot ExplorerUser interface to review the history of Physical Layer Measurement Reports stored.
History Data ExportExport of long-term history data to Excel and the file formats comma-separated (CSV) or binary for graphic analysis and diagram creation
Segment Focus ModeFast update of detailed measurements for a single segment
Integrated oscilloscopeDisplays fieldbus signals in waveform giving greatest detail. To aid troubleshooting activities, even seldom occuring events can be captured using the oscilloscope's many selectable trigger functions.
OPC Server InterfaceThe open OPC server interface can easily be adapted to any OPC client. It provides as a Data Access Server (Version 2.05) Summarized State information and basic diagnostic data such as the operating status of the diagnostic module and of the segments.
Remote diagnosticsFieldbus experts and maintenance contractors are enabled to review Physical Layer diagnostics from off-site.

Documents: DTM-FC.AD*

ManualsLanguageFile TypeFile Size
ManualENGPDF20000 KB
HandbuchGERPDF9657 KB
Short instructions, safety information
Quick Start Guide Diagnostic ManagerENGPDF367 KB
Product information
Release Notes Diagnostic Gateway FF DTMENGPDF7 KB
Release Notes Diagnostic ManagerENGPDF23 KB
Technical Information Advanced Diagnostic with Yokogawa Plant Resource Manager (PRM)ENGPDF2346 KB
Documents
End-user software license agreement (EULA)ENGPDF37 KB

Associated Products: DTM-FC.AD*

Accessory of

Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PApa

Basic monitoring for power supply output and health, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PApa
Diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PApa
Comprehensive diagnostics for the fieldbus physical layer, Module and motherboard for retrofit of any installation, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PApa
Matching system components

System integration kit for Advanced Diagnostics, PCS integration via Diagnostic Manager or device DTM, Simple automatic setup of Advanced Diagnostics, Common alarm handling, For FOUNDATION Fieldbus and PROFIBUS PApa

System integration kit for Advanced Diagnostics, PCS integration via Diagnostic Manager or device DTM, Simple automatic setup of Advanced Diagnostics, Alarm handling and integrated I/O for cabinet monitoring/control, For FOUNDATION Fieldbus and PROFIBUS PApa
Accessories
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa
Software for connecting people, information, systems, and devices, For applications developed using .NET, Required to run PACTwareTMpa