Serviceline Industrial Sensors
Serviceline Explosion Protection

DTM collection DTM Wireless HART

DTM Wireless HART
  • Device DTM
  • For WirelessHART devices
  • Frame application, like e. g. PACTware, must be installed separately

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  DTM Wireless HART

General specifications
DescriptionCollection of all device- and communications-DTMs for parameterization of WirelessHART devices
(WHA-ADP-F8B2-*-P*-Z2(-1), WHA-GW-F2D2-0-A*-Z2-ETH, WHA-UT-F7B1-0-PP-Z1-Ex2)
Software
Hardware requirements- processor min. 500 MHz
- working memory: min. 256 MB
- hard disk space: min. 200 MB
- graphic resolution 1024 x 768
Depending on the complexity of the project and the DTMs used, the memory requirement may be several times higher.
Software requirementsoperating system:
- Microsoft Windows 7, Windows 8 or Windows 10
internet browser:
- Microsoft Internet Explorer 4.0 or higher
software components for installation
- Microsoft .Net Framework 3.5 or higher
- FDT framework program PACTware 5.X
- the application-specific device type manager
LanguagesGerman, English, French, Spanish, Russian can be selected
LicensingThe Pepperl+Fuchs DTM-Collections can be downloaded separately or altogether in a version with basic license. This version can also be obtained on CD-ROM from Pepperl+Fuchs.

Basic license:
The software remains a basic version after installation under the terms of a basic license that may have limited features. The basic license is delivered free of charge.

Full license:
The full license can only be activated by an individual license key number and transfers a basic version of software to a full version under the term of a full license. The software under these terms can be installed on more than one workstation simultaneously. The full licenses with the functionality quoted in the following can be ordered at Pepperl+Fuchs.
Available licensesDTM-Collection WirelessHART:
basic license already includes full license, no further licenses necessary
InstallationAdministrator rights are required For installation in Windows.
Configuration
Representation of the system configurationGraphic representation of all communication and device type managers in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be opened simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously.
System planning, application processingGeneration of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels.

Documents: DTM Wireless HART

Instruction manualsLanguageFile TypeFile Size
Installation instructionsENGPDF99 KB
InstallationsanleitungGERPDF111 KB

Software: DTM Wireless HART

Device type managersRelease InfoFile TypeFile Size
DTM Collection WirelessHART V1.0.2.4 / DTM Collection WirelessHART V1.0.2.4ZIP22259 KB

Associated Products: DTM Wireless HART

Accessories
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa
Software for connecting people, information, systems, and devices, For applications developed using .NET, Required to run PACTwarepa

Function: DTM Wireless HART

  • Based on FDT technology

  • Device Type Manager (DTMs) available for all Pepperl+Fuchs devices and systems

  • Commissioning, configuration and parameter assignment independent of the process control system

  • Communication DTMs available for serial interfaces and fieldbus systems

  • Maintenance, diagnostics and error correction

  • In accordance with VDI/VDE 2187