Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
General specifications | ||
---|---|---|
Signal type | Analog input | |
Supply | ||
Connection | terminals 14+, 15- or Power Rail | |
Rated voltage | 20 ... 30 V DC | |
Rated current | ≤ 80 mA DC | |
Power consumption | ≤ 1.6 W | |
Input | ||
Connection side | field side | |
Connection | terminals 1+, 3- : mV, V ; terminals 2+, 3- : mA | |
Input resistance | voltage: 1 MΩ , current: max. 100 Ω | |
Limit | 30 V | |
Current | 0 ... 20 mA | |
Voltage | 0 ... 10 V / 0 ... 60 mV | |
Resolution | 15 Bit | |
Output | ||
Connection side | control side | |
Connection | output I: terminals 10, 11, 12 output II: terminals 7-, 8+, 9- |
|
Output I | signal, relay | |
Contact loading | 250 V AC/2 A/cos φ 0.7; 40 V DC/2 A | |
Mechanical life | 2 x 107 switching cycles | |
Energized/De-energized delay | approx. 10 ms / approx. 10 ms | |
Output II | analog | |
Load | current: max. 550 Ω , voltage: min. 1 kΩ | |
Analog voltage output | 0/1 ... 5 V , 0/2 ... 10 V | |
Analog current output | 0/4 ... 20 mA | |
Transfer characteristics | ||
Deviation | 0.1 % of full-scale value | |
Resolution/accuracy | current: 1 µA/20 µA voltage: 0.5 mV/10 mV mV: 3 µV/60 µV |
|
Influence of ambient temperature | 0.003 %/K (30 ppm) | |
Reaction time | ≥ 150 ms/≤ 300 ms | |
Galvanic isolation | ||
Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Indicators/settings | ||
Display elements | display | |
Control elements | Control panel | |
Configuration | via operating buttons | |
Labeling | space for labeling at the front | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Low voltage | ||
Directive 2014/35/EU | EN 61010-1:2010 | |
Conformity | ||
Electromagnetic compatibility | NE 21 | |
Degree of protection | IEC 60529 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | screw terminals | |
Mass | 150 g | |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B3 | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Manuals | Language | File Type | File Size |
---|---|---|---|
Manual KF**-USC-1.D | ENG | 395 KB | |
Manual Signal Conditioners K-System | ENG | 694 KB | |
Manuel KF**-USC-1.D | FRA | 986 KB | |
Handbuch KF**-USC-1.D | GER | 408 KB | |
Handbuch Signaltrenner K-System | GER | 698 KB | |
Manual Signal Conditioners K-System | RUS | 3736 KB | |
Instruction leaflets | |||
Operator card KF**-USC-1.D / Bedienkarte KF**-USC-1.D | ALL | 331 KB | |
Instruction manuals | |||
Инструкции | BUL | 53 KB | |
Návod k poużití | CZE | 47 KB | |
Instruktions manual | DAN | 47 KB | |
Instruction manual | ENG | 41 KB | |
Kasutusjuhend | EST | 44 KB | |
Käyttöohje | FIN | 44 KB | |
Manuel d'instructions | FRA | 79 KB | |
Betriebsanleitung | GER | 43 KB | |
Οδηγίες χρήσης | GRE | 55 KB | |
Handleiding | HOL | 56 KB | |
Instruction manual / Betriebsanleitung | HRV | 55 KB | |
Használati útmutató | HUN | 55 KB | |
Manuale di istruzioni | ITA | 77 KB | |
Lietošanas pamācība | LAV | 54 KB | |
Instrukciju vadovas | LIT | 55 KB | |
Instrukcja obsługi | POL | 57 KB | |
Manual de instruções | POR | 56 KB | |
Manual de utilizare | RON | 56 KB | |
Návod na poużitie | SLK | 115 KB | |
Manual de instrucciones | SPA | 79 KB | |
Manual | SWE | 53 KB |
CAD | File Type | File Size | |
---|---|---|---|
CAD Portal / CAD Portal | LINK | --- | |
Dimension drawing 2-D (DXF) / Abmessungszeichnung 2-D (DXF) | ZIP | 507 KB | |
Dimension drawing 3-D in IGS format / Abmessungszeichnung 3-D im IGS-Format | IGS | 209 KB | |
Dimension drawing 3-D in STP format / Abmessungszeichnung 3-D im STP-Format | STP | 179 KB | |
EPLAN | |||
EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 83 KB | |
Prolist | |||
Prolist device specification / Prolist Gerätespezifikation | XML | 22 KB |
Statements of compliance | Certificate No. | File Type | File Size |
---|---|---|---|
EU-Declaration of conformity / EU-Konformitätserklärung | DOC-2364 | 358 KB | |
Certificates | |||
Belarus Pattern Approval | Nr. 11709 | 15640 KB | |
EAC EAC TP TC 020/2011 | TC RU C-DE.MH04.B.00397 | 680 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
This signal conditioner is suitable for the connection of current and voltage signals and provides isolation for non-intrinsically safe applications.
The input ranges include 0 mA ... 20 mA, 0 V ... 10 V or 0 mV ... 60 mV. Subranges from the input ranges are selectable.
The output measuring signals are 0/4 mA ... 20 mA, 0/2 V ... 10 V or 0/1 V ... 5 V.
The output relay serves as trip value contact.
On the display the measured value can be indicated in various physical units.
The unit is easily programmed by the use of a keypad located on the front of the unit.
For additional information, refer to the manual and www.pepperl-fuchs.com.