Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Relay Module KFD0-RSH-1.1E.1

KFD0-RSH-1.1E.1
  • 1-channel signal conditioner
  • 24 V DC supply (loop powered)
  • Logic input 19 V DC ... 26.5 V DC, non-polarized
  • Relay contact output for energized to safe function
  • Test pulse immunity
  • Up to SIL 3 acc. to IEC 61508

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of KFD0-RSH-1.1E.1

General specifications
Signal typeDigital Output
Functional safety related parameters
Safety Integrity Level (SIL)SIL 3
Supply
Connectionloop powered
Rated voltage19 ... 30 V DC loop powered
Power dissipation< 1.5 W
Power consumption< 1.5 W
Input
Connection sidecontrol side
ConnectionInput terminals 7, 8 ; test input terminals 9, 10, 11, 12
Pulse/Pause ratio150 ms / 150 ms
Test pulse lengthmax. 4 ms from DO card
Test inputsee Functional Safety Manual
Signal level0-signal: -5 ... 5 V
1-signal: 19 ... 26.5 V
Rated current0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card)
1-signal: ≥ 36 mA (minimum load current DO card)
Output
Connection sidefield side
Connectionterminals 2, 3
Contact loading253 V AC/5 A/cos φ 0.7; 30 V DC/5 A resistive load
253 V AC / 1/2 HP
Minimum switch current10 mA / 24 V DC
Energized/De-energized delay150 ms / 150 ms
Mechanical life5 x 106 switching cycles
Transfer characteristics
Switching frequency< 3 Hz
Galvanic isolation
Input/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Indicators/settings
Display elementsLEDs
Labelingspace for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Low voltage
Directive 2014/35/EUEN 61010-1:2010
Conformity
Electromagnetic compatibilityNE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008
Degree of protectionIEC 60529:2013
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Observe the temperature range limited by derating, see section derating.
Mechanical specifications
Degree of protectionIP20
Connectionscrew terminals
Massapprox. 120 g
Dimensions20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
CertificatePF 15 CERT 3933 X
MarkingEx-Hexagon II 3G Ex nC ec IIC T4 Gc [device in zone 2]
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010
International approvals
UL approvalE106378
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Documents: KFD0-RSH-1.1E.1

ManualsLanguageFile TypeFile Size
Functional Safety ManualENGPDF401 KB
Manual Signal Conditioners K-SystemENGPDF694 KB
Handbuch Funktionale SicherheitGERPDF397 KB
Handbuch Signaltrenner K-SystemGERPDF698 KB
Manual Signal Conditioners K-SystemRUSPDF3736 KB
Instructions, short instructions, safety information
ИнструкцииBULPDF135 KB
Návod k poużitíCZEPDF130 KB
Instruktions manualDANPDF129 KB
Instruction manualENGPDF134 KB
KasutusjuhendESTPDF125 KB
KäyttöohjeFINPDF125 KB
Manuel d'instructionsFRAPDF131 KB
BetriebsanleitungGERPDF135 KB
Οδηγίες χρήσηςGREPDF138 KB
HandleidingHOLPDF129 KB
Instruction manual / BetriebsanleitungHRVPDF129 KB
Használati útmutatóHUNPDF131 KB
Manuale di istruzioniITAPDF129 KB
Lietošanas pamācībaLAVPDF129 KB
Instrukciju vadovasLITPDF129 KB
Instrukcja obsługiPOLPDF131 KB
Manual de instruçõesPORPDF129 KB
Manual de utilizareRONPDF129 KB
Návod na poużitieSLKPDF129 KB
Navodila za uporaboSLVPDF127 KB
Manual de instruccionesSPAPDF130 KB
ManualSWEPDF127 KB

Approvals+Certificates: KFD0-RSH-1.1E.1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2549APDF84 KB
Certificates
Canada UL cULE106378 cUL (QUZW7)LINK---
Europe Pepperl+Fuchs ATEX Category 3 GPF 15 CERT 3933 XPDF225 KB
USA ULE106378 UL (QUZW)LINK---
Worldwide TUV Rheinland968/FSP 1255.00/16 ENPDF678 KB
K-System Safety Relays

Triple Protection

Pepperl+Fuchs is setting a new level of reliability with newly developed safety relays. With multi-redundant switching contacts, the interface module from the tried-and-tested K-System provides reliable and safety-related activation and deactivation for applications in accordance with IEC61508 up to SIL 3.