Serviceline Industrial Sensors
Serviceline Explosion Protection

USi-industry evaluation unit USIS-F264-IU3E5-V19

USIS-F264-IU3E5-V19
  • Evaluation unit for ultrasonic transducers with eliptic sound field
  • Object detection in the near range
  • Multiple device installation possible, no mutual interference (no cross-talk)
  • Adjustable sound cone
  • Temperature compensation
  • Parameterizable input, e.g. for switching between two parameter sets

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  USIS-F264-IU3E5-V19

Product Description
Evaluation unit for the ultrasonic sensor system USi-industry with analog and switching outputs (stand-alone device/secondary device)
General specifications
TypeUSi-industry evaluation unit
Sensing range10 ... 2500 mm
factory setting: 2000 mm
Adjustment range150 ... 2500 mm
Dead band0 ... 10 mm
Object sizetyp. ∅ 10 mm
Transducer frequencyapprox. 103 kHz
Response delay10 ... 20000 ms
factory setting: 150 ms
Sensor cycle time10 ... 200 ms
factory setting: 50 ms
Resolution1 mm
Target velocityaxial (max.): typ. 2 m/s (up to 2.5 m/s)
Repeat accuracy± 0.1 % of full-scale value
Temperature influenceautomatic or manual temperature compensation available ,
without temperature compensation: 0.17 %/K
Indicators/operating means
LED greensupply voltage/device status
LED yellowoutput states
ButtonTeach-in
Electrical specifications
Operating voltage9 ... 30 V DC
No-load supply current≤ 160 mA
Power consumption< 2.5 W
Time delay before availability≤ 300 ms
Interface
Interface typeUSB 2.0
Inputs
Input type2 inputs for ultrasonic transducers
1 digital input
Output 1
DesignationOUT 1.1
Output type1 analog output 4 ... 20 mA or 1 analog output 0 ... 10 V
Deviation of the characteristic curve± 1 % of the full-scale value
Load resistorcurrent output: ≤ 500 Ω
voltage output: ≥ 1000 Ω
Output 2
DesignationOUT 1.2
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Output 3
DesignationOUT 2.1
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Output 4
DesignationOUT 2.2
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
EN 60947-5-7:2003
IEC 60947-5-7:2003
EN 55011:2016-04
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 70 °C (-22 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug
Degree of protectionIP65
Connectionfor power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m
for ultrasonic transducer: for each socket M8, 3-pin
for parameterization: socket Mini USB
Material
Housingdiecast aluminum
Mass250 g
Dimensions
Height35 mm
Width77 mm
Length98 mm

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: USIS-F264-IU3E5-V19

Function

The USi-industry ultrasonic sensor system is used in applications for object detection, area monitoring and distance measurement, for example on machines and systems. It is also used as an assistance system on mobile machines such as robots and driverless transport systems (AGVs) for collision avoidance both indoors and outdoors. The evaluation unit and the ultrasonic transducers to be connected to it are separate units. This enables a high degree of flexibility and a wide range of applications, so that even the smallest installation spaces can be used for ultrasonic sensor technology.

Up to 2 ultrasonic transducers with an elliptical sound field can be connected to the evaluation unit and freely positioned. Each ultrasonic transducer is assigned 2 outputs. The evaluation unit has a total of 4 outputs as well as 1 digital input and 1 synchronization line, all of which can be parameterized individually and independently of each other and integrated into a wide variety of applications. All types of USi-industry evaluation units are delivered as stand-alone devices and are therefore equivalent, regardless of whether they are main devices or secondary devices. Even without an electrical connection, several individual devices can be operated together without interference by means of special parameterization.

The digital input can be defined for one of the following functions, either

  • to switch off the outputs or

  • to switch to another parameter set without interruption or

  • for teaching in a changing environment during operation.

The teach-in button can be used to

  • teach in the environment of the detection area,

  • set the switching points,

  • log the second ultrasonic transducer on or off and

  • reset the evaluation unit to the factory settings.

Complete parameterization is conveniently carried out using the Device Type Manager (DTM) under PACTware via the integrated USB interface. These parameters define the inputs and outputs, switching points and operating modes, sensor and ultrasound-specific values as well as synchronization options and temperature compensation. as well as synchronization options and temperature compensation.

Informative Literature: USIS-F264-IU3E5-V19

Language Selection:
LiteratureLanguageFile TypeFile Size
Product Information - Ultrasonic Sensor Systems USi®-industry and USi®-safetyENGPDF1781 KB
Application Report - Reliable Collision Protection for Baggage Conveyor Vehicles ENGPDF347 KB
Application Report - Travel Path Control for Autonomous Transport Bots in Logistics Centers ENGPDF333 KB

Product Documentation: USIS-F264-IU3E5-V19

Language Selection:
ManualsLanguageFile TypeFile Size
Manual USi-industry USI*-F264-*-V19ENGPDF2461 KB

Approvals: USIS-F264-IU3E5-V19

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Canada USA UL Ordinary LocationE87056, Vol.1, Sec.65ALLPDF285 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)DOC-7654ALLPDF69 KB
UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F)DOC-7655ALLPDF67 KB

Software: USIS-F264-IU3E5-V19

Language Selection:
Device Description Files/DriversRelease InfoFile TypeFile Size
DTM for USI*-F264-* / DTM für USI*-F264-*V1.0.0.3 / 2024-10-08ZIP22284 KB
Software Tools
PACTware 6.X / PACTware 6.X6.1ZIP335938 KB

Associated Products: USIS-F264-IU3E5-V19

Matching System Components

Ultrasonic transducer with 1.5 m cable, exclusively for the USi ultrasonic sensor systems , Extremely compact dimensions, Elliptic sound cone, 1.5 m cable lengthfa
Ultrasonic transducer with 3 m cable, exclusively for the USi ultrasonic sensor systems , Extremely compact dimensions, Elliptic sound cone, 3 m cable lengthfa
Horizontal mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Vertical mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Horizontal mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Vertical mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Accessories
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa
Adapter cable USB-A plug straight to Mini-USB-B plug straight 4-pin, PVC cable black, shieldedfa
USi-safety Sensor System

The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.