Serviceline Industrial Sensors
Serviceline Explosion Protection

Ultrasonic sensor UB4000-30GM-H3-4DT04

UB4000-30GM-H3-4DT04
  • Separate evaluation
  • Direct detection mode

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  UB4000-30GM-H3-4DT04

Product Description
Single head system
General specifications
Sensing range200 ... 4000 mm
Adjustment range240 ... 4000 mm
Dead band0 ... 200 mm 1)
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 85 kHz
Electrical specifications
Operating voltage10 ... 30 V DC , ripple 10 %SS
No-load supply current≤ 30 mA
Input
Input type1 pulse input for transmitter pulse (clock)
0-level (active): < 5 V (UB > 15 V)
1-level (inactive): > 10 V ... +UB (UB > 15 V)
0-level (active): < 1/3 UB (10 V < UB < 15 V)
1-level (inactive): > 2/3 UB ... +UB (10 V < UB < 15 V)
Pulse length40 ... 600 µs (typ. 500 µs) 2)
Pause length≥ 50 x pulse length
Impedance10 kOhm internal connected to +UB
Output
Output type1 pulse output for echo run time, short-circuit proof
open collector PNP with pulldown resistor = 22 kOhm
level 0 (no echo): -UB
level 1 (echo detected): ≥ (+UB-2 V)
Rated operating current15 mA , short-circuit/overload protected
Temperature influencethe echo propagation time: 0.17 % / K
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP67
ConnectionDeutsch connector, 4-pin DT-04-4P with 300 mm (1 ft) cable
Material
Housingstainless steel (1.4305 / AISI 303)
PBT plastic parts
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Mass210 g

CAD+CAE: UB4000-30GM-H3-4DT04

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS126 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP35 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: UB4000-30GM-H3-4DT04

CertificatesCertificate No.File TypeFile Size
Canada USA CSA Ordinary Location1007121PDF99 KB
US CA UL General PurposeE87056LINK---

Associated Products: UB4000-30GM-H3-4DT04

Accessories

Mounting flange, 30 mmfa

Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa