Serviceline Industrial Sensors
Serviceline Explosion Protection

Ultrasonic sensor UMC3000-30H-I-5M-FA

UMC3000-30H-I-5M-FA
  • Front of transducer and housing manufactured entirely from stainless steel
  • Hygienic design, easy to clean
  • Degree of protection IP68 / IP69K
  • Programmable via DTM with PACTWARE
  • Mounting bracket MH-30H-01-FA included in delivery

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  UMC3000-30H-I-5M-FA

Product Description
Single head system
General specifications
Sensing range200 ... 3000 mm
Adjustment range240 ... 3000 mm
Dead band0 ... 200 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 100 kHz
Response delay≤ 200 ms
Indicators/operating means
LED greenOperating display
LED yellowobject in evaluation range
LED rederror
Electrical specifications
Operating voltage10 ... 30 V DC
No-load supply current≤ 50 mA
Input/Output
Input/output type1 synchronization connection, bidirectional
0 Level0 ... 1 V
1 Level4 V ... UB
Input impedance> 12 kΩ
Output rated operating current< 12 mA
Pulse length≥ 200 µs
Pulse interval≥ 2 ms
Synchronization frequency
Common mode operation≤ 20 Hz
Multiplex operation≤ 20/n Hz, n = number of sensors n ≤ 10 (factory setting: 5 )
Input
Input type1 program input
Level (evaluation limit 1)0 ... 1 V
Level (evaluation limit 2)3 V ... UB
Input impedance> 12 kΩ
Pulse length2 ... 5 s
Output
Output type1 analog output 4 ... 20 mA
ResolutionEvaluation range [mm]/3200, however ≥ 0.4 mm
Deviation of the characteristic curve≤ 0.2 % of full-scale value
Repeat accuracy≤ 0.1 % of full-scale value
Load impedance≤ 500 Ω at UB ≥ 14V
≤ 300 Ω at UB < 14V
Temperature influence≤ 1.5 % of full-scale value
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
EHEDGType EL Class I AUX
ECOLAByes
Ambient conditions
Ambient temperature-25 ... 60 °C (-13 ... 140 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable PUR , 5 m , With FDA approval
Core cross-section5 x 0.5 mm2
Degree of protectionIP68 / IP69K
Material
Housingstainless steel 1.4404 / AISI 316L
LED window: VMQ Elastosil LR 3003/Shore 50 A
TransducerStainless steel 1.4435 / AISI 316L
Mass425 g

Documents: UMC3000-30H-I-5M-FA

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF563 KB

Approvals+Certificates: UMC3000-30H-I-5M-FA

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2459APDF238 KB
Certificates
/cert/cert3871e.pdf31/2015PDF174 KB
Ecolab Material ResistanceECOLAB-21-06-2010PDF1079 KB

Software: UMC3000-30H-I-5M-FA

Device type managersRelease InfoFile TypeFile Size
DTM for L2 and UMC3000 devices / DTM für Geräte der Serien L2 und UMC30001.2.0.10ZIP4703 KB
Software Tools
PACTware 4.1 SP5 / PACTware 4.1 SP54.1.0.52ZIP50675 KB
PACTware 5.0 / PACTware 5.05.0.4.20ZIP50037 KB

Associated Products: UMC3000-30H-I-5M-FA

Accessories
Programming adapter, USB 2.0 interface, Simple insertion in the sensor connection leadfa
Male cordset, M12, 5-pin, PUR cable with WAGO terminalsfa
Mounting aid, 30 mm acc. to EHEDG, Retainer for 30 mm cylindrical sensors with smooth housing, Installation in 3 ... 12 mm thick sheet metal, Simple installation and exact settingfa

Function: UMC3000-30H-I-5M-FA

The enclosure and transducer of this ultrasonic sensor form a hermetically sealed unit. Due to its special design, this sensor is EHEDG compliant, and together with an appropriate fixture are especially suitable for applications where there are increased hygiene requirements, such as in the manufacture and handling of food.

For reliable operation, due to the special design of this sensor, solely the enclosed mounting accessories must be used, even in applications without special hygiene requirements.