Serviceline Industrial Sensors
Serviceline Explosion Protection

Ultrasonic sensor UC2000-30GM-2EP-IO-V15

UC2000-30GM-2EP-IO-V15
  • IO-Link interface for service and process data
  • Programmable via DTM with PACTWARE
  • 2 programmable switch outputs
  • Selectable sound lobe width
  • Synchronization options
  • Temperature compensation

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  UC2000-30GM-2EP-IO-V15

Product Description
Single head system
General specifications
Sensing range90 ... 2000 mm
Adjustment range120 ... 2000 mm
Dead band0 ... 90 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 200 kHz
Response delayminimum : 65 ms
factory setting: 125 ms
Memory
Non-volatile memoryEEPROM
Write cycles100000
Indicators/operating means
LED greensolid: Power on
flashing: Standby mode or IO link communication
LED yellow 1solid: Object in evaluation range
flashing: Learning function, object detected
LED yellow 2solid: Object in evaluation range
flashing: Learning function, object detected
LED redsolid red: Error
red, flashing: program function, object not detected
Electrical specifications
Operating voltage10 ... 30 V DC , ripple 10 %SS
No-load supply current≤ 60 mA
Power consumption≤ 1 W
Time delay before availability≤ 120 ms
Interface
Interface typeIO-Link
ProtocolIO-Link V1.0
Transfer rateAcyclical: typical 95 Bit/s
Cycle timemin. 33.6 ms
ModeCOM 2 (38.4 kBaud)
Process data width16 bit
SIO mode supportyes
Input/Output
Input/output type1 synchronization connection, bidirectional
0 Level0 ... 1 V
1 Level4 V ... UB
Input impedance> 12 kΩ
Output rated operating current< 12 mA
Pulse length0.5 ... 300 ms (level 1)
Pulse interval≥ 33 ms (level 0)
Synchronization frequency
Common mode operation≤ 30 Hz
Multiplex operation≤ 33 Hz / n , n = number of sensors , n ≤ 10
(factory setting: n = 5 )
Output
Output type2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
Rated operating current200 mA , short-circuit/overload protected
Voltage drop≤ 2.5 V
Repeat accuracy≤ 0.1 % of full-scale value
Switching frequency≤ 4 Hz
Range hysteresis1 % of the adjusted operating range (default settings), programmable
Temperature influence≤ 1.5 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation)
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug M12 x 1 , 5-pin
Degree of protectionIP67
Material
HousingStainless steel 1.4305 / AISI 303
TPU
Polyamides
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Mass72 g
Factory settings
Output 1near switch point: 120 mm
far switch point: 2000 mm
output function: Window mode
output behavior: NO contact
Output 2near switch point: 120 mm
far switch point: 1000 mm
output function: Window mode
output behavior: NO contact
Beam widthwide

Classifications

SystemClasscode
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

CAD+CAE: UC2000-30GM-2EP-IO-V15

CADFile TypeFile Size
3-D model / 3-D-ModellSTP135 KB
CAD Portal / CAD PortalLINK---
EPLAN
EPLAN Data Portal / EPLAN Data PortalLINK---
EPLAN macro EDZ / EPLAN Makro EDZEDZ68 KB

Approvals+Certificates: UC2000-30GM-2EP-IO-V15

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2936BPDF47 KB
Certificates
IO-Link Manufacturer DeclarationCERT-3037APDF140 KB

Software: UC2000-30GM-2EP-IO-V15

Device type managersRelease InfoFile TypeFile Size
DTM UC****-30GM-IUEP-IO-V15 and UC****-30GM-2EP-IO-V15 devices / DTM UC****-30GM-IUEP-IO-V15 und UC****-30GM-2EP-IO-V15 Geräte1.1.0.0ZIP7371 KB
IO Device Description (IODD)
IODDs for UC...-30GM-**-IO-V15 / IODDs f�r UC...-30GM-**-IO-V15V1.01 / 2013-10-29ZIP307 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-ParametriertoolV1.00.005 / 2021-07-01ZIP64072 KB

Associated Products: UC2000-30GM-2EP-IO-V15

Accessories

Mounting flange, 30 mmfa

Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa

Female cordset single-ended M12 angled A-coded, 5-pin, PVC cable greyfa

Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Plastic mounting adapter, 30 mmfa
Ultrasonic -deflector, Universal mounting possibilities, 90° sound deflection for difficult installation circumstances, Focussing effectfa
Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa
Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors, For insulated mountingfa
USi-safety Sensor System

The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.