Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Ultrasonic direct detection sensor UB400-F77-E2-V31

UB400-F77-E2-V31
  • Miniature design
  • Program input
  • Degree of protection IP67
  • Switching status indicator, yellow LED

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of UB400-F77-E2-V31

Product Description
Ultrasonic direct detection sensor
General specifications
Sensing range25 ... 400 mm
Adjustment range40 ... 400 mm
Dead band0 ... 25 mm
Standard target plate20 mm x 20 mm
Transducer frequencyapprox. 300 kHz
Nominal ratings
Time delay before availability≤ 150 ms
Limit data
Permissible cable lengthmax. 300 m
Indicators/operating means
LED yellowswitching state and flashing: Teach-In
Electrical specifications
Rated operating voltage24 V DC
Operating voltage20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90 %
No-load supply current≤ 20 mA
Input
Input type1 program input
Levellow level : 0 ... 0.7 V (Teach-In active)
high level : UB or open input (Teach-In inactive)
Input impedance16 kΩ
Pulse length≥ 3 s
Output
Output type1 switch output PNP, NO
Rated operating current200 mA , short-circuit/overload protected
Voltage drop≤ 2 V
Switch-on delay≤ 75 ms
Repeat accuracy± 1 mm
Switching frequency  5 Hz
Range hysteresistyp. 4 mm
Off-state current≤ 0.01 mA
Temperature influence+ 0.17 %/K
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Shock resistance30 g , 11 ms period
Vibration resistance10 ... 55 Hz , Amplitude ± 1 mm
Mechanical specifications
Connection typeM8 x 1 connector , 4-pin
Degree of protectionIP67
Material
HousingPolycarbonate
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Installation positionany position
Mass10 g
Tightening torque, fastening screwsmax. 0.2 Nm

Documents: UB400-F77-E2-V31

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF425 KB
Documents
Application Report - Object Detection on Robot GrippersENGPDF242 KB
Applikationsbericht - Objekterfassung am Roboter-GreifarmGERPDF244 KB

Approvals+Certificates: UB400-F77-E2-V31

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2942APDF239 KB
Certificates
Canada USA UL Ordinary Location20181116-E87056PDF237 KB

Associated Products: UB400-F77-E2-V31

Accessories

Female cordset, M8, 4-pin, PVC cablefa

Female cordset, M8, 4-pin, PVC cablefa
Programming unit for ultrasonic sensors with Teach-in input at pin 2fa
Mounting aid for ML7 and ML8 series, Mounting bracketfa