Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
UC10000-F260-UE9R2
Product Description |
Single head system |
General specifications |
Sensing range | 800 ... 10000 mm |
Adjustment range | 800 ... 10000 mm |
Dead band | 0 ... 800 mm |
Standard target plate | 100 mm x 100 mm |
Transducer frequency | approx. 60 kHz |
Indicators/operating means |
LED yellow | solid: switching state switch output flashing: misadjustment |
Electrical specifications |
Operating voltage | 15 ... 30 V (including ripple) In supply voltage interval 15 ... 20 V sensitivity reduced to 20% ... 0% |
No-load supply current | ≤ 75 mA |
Input/Output |
Input/output type | 1 synchronization connection, bidirectional |
| 0 Level | ≤ 3 V |
| 1 Level | 15 ... 30 V |
| Input impedance | typ. 0.9 kΩ |
| Number of sensors | max. 10 |
Switching output |
Output type | 2 switch outputs PNP, NC |
Repeat accuracy | ± 15 mm |
Operating current | 150 mA , short-circuit/overload protected |
Voltage drop | ≤ 3 V |
Analog output |
Output type | 1 voltage output: 0 ... 10 V rising ramp |
Default setting | 800 ... 10000 mm |
Linearity error | ≤ 1.5 % |
Load resistor | > 2 kΩ |
Approvals and certificates |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Connection type | screw terminals , PG 13.5 cable gland |
Degree of protection | IP65 |
Material | |
| Housing | UP 1225 SF/R8 |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
Mass | 1800 g |
Classifications
System | Classcode |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Documents:
UC10000-F260-UE9R2
CAD+CAE:
UC10000-F260-UE9R2
Approvals+Certificates:
UC10000-F260-UE9R2
Associated Products:
UC10000-F260-UE9R2
Accessories |
|
|
|
Receptacles, M12/M20; plastic versionfa |
|
Function:
UC10000-F260-UE9R2
This ultrasonic sensor is a contactless distance sensor based on the echo run time principle. It is suitable for the detection of solid, liquid or powder sound-reflecting objects.
The unique sensor design allows easy movement of the direction of sound radiation in all spatial directions by up to 10° without additional an additional assembly device.