Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Ultrasonic sensor UC800-F77S-EP-IO-V31

UC800-F77S-EP-IO-V31
  • IO-link interface for service and process data
  • Programmable via DTM with PACTWARE
  • Continuous distance value via IO-Link process data
  • Selectable sound lobe width
  • Synchronization options
  • Temperature compensation
  • Push-pull output

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of UC800-F77S-EP-IO-V31

Product Description
Single head system
General specifications
Sensing range60 ... 800 mm
Adjustment range70 ... 800 mm
Dead band0 ... 60 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 255 kHz
Response delayminimum : 13 ms
factory setting: 49 ms
Sensor cycle time≥ 13 ms (factory setting) ;
programmable to 60 s
Memory
Non-volatile memoryEEPROM
Write cycles300000
Indicators/operating means
LED greensolid: Power on
flashing: Standby mode or IO-Link communication
LED yellowsolid: object in evaluation range
flashing: switch point programming, object detected
LED redsolid: error
flashing: switch point programming, object not detected
Electrical specifications
Operating voltage10 ... 30 V DC , ripple 10 %SS
No-load supply current≤ 40 mA
Power consumption≤ 400 mW
Time delay before availability≤ 300 ms
Interface
Interface typeIO-Link (via C/Q = Pin 4)
Device profileSmart Sensor
Transfer rateCOM 2 (38.4 kBaud)
IO-Link Revision1.1
Min. cycle time2.3 ms
Process data witdh16 bit
SIO mode supportyes
Device ID0x300302 (3146498)
Compatible master port typeA
Input/Output
Input/output type1 synchronization connection, bidirectional
0 Level0 ... 1 V
1 Level2.5 V ... UB
Input impedance> 22 kΩ
Output rated operating currentcurrent source < 2.5 mA
Pulse length≥ 1 ms with external control, low active
Synchronization frequency
Common mode operation≤ 82 Hz
Multiplex operation≤ 82 Hz / n , n = number of sensors , n ≤ 10
Output
Output type1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
Rated operating current100 mA , short-circuit/overload protected
Voltage drop≤ 2.5 V
Repeat accuracy≤ ± 0.1 % of full-scale value
Switching frequencyfactory setting: 12 Hz programmable max. 27 Hz
Range hysteresis1 % of the adjusted operating range (default settings), programmable , min. 1 mm
Temperature influence≤ ± 0.75 % of the end value (with temperature compensation) from 10 minutes after switching on the sensor ; 0,17 %/K (without temperature compensation)
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
IEC 61131-9:2013
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
When fixing with one M18 nut, the temperature range begins with 0 °C (32 °F).
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug M8 x 1 , 4-pin
Degree of protectionIP67
Material
HousingPolycarbonate
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Installation positionany position
Mass13 g
Tightening torque, fastening screwswith M3 nuts max. 0.2 Nm
with M18 nuts max. 1 Nm
Factory settings
Outputnear switch point: 70 mm
far switch point: 800 mm
Output mode: Window mode
Output logic: normally open
Beam widthwide

Approvals+Certificates: UC800-F77S-EP-IO-V31

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3523APDF254 KB
Certificates
Canada USA UL Ordinary Location20181116-E87056PDF237 KB
Pepperl+Fuchs IO-Link Manufacturer DeclarationCERT-4363PDF254 KB

Associated Products: UC800-F77S-EP-IO-V31

Accessories

Female cordset, M8, 4-pin, PVC cablefa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Double-ended cordset, M8 to M12fa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa