Bus Termination Module FB9295B3
- Terminates bus, service bus, or both depending on model
- Installation in suitable enclosures in Zone 1
- Module can be exchanged under voltage in Zone 1 (hot swap; be aware bus operation may be affected)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of FB9295B3
| Supply | ||
|---|---|---|
| Connection | backplane bus | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1 | |
| Conformity | ||
| Electromagnetic compatibility | NE 21 | |
| Degree of protection | IEC 60529 | |
| Environmental test | EN 60068-2-14 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Damaging gas | EN 60068-2-42 | |
| Relative humidity | EN 60068-2-56 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Relative humidity | 95 % non-condensing | |
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 | |
| Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance |
|
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Degree of protection | IP20 (module) , a separate housing is required acc. to the system description | |
| Mass | approx. 350 g | |
| Dimensions | 28 x 107 x 132 mm (1.1 x 4.2 x 5.2 inch) | |
| General information | ||
| System information | The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Documents: FB9295B3
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| FB Hardware Manual | ENG | 8600 KB | |
| FB-Hardware-Handbuch | GER | 8567 KB | |
| Instruction manuals | |||
| Инструкции | BUL | 152 KB | |
| Návod k poużití | CZE | 144 KB | |
| Instruktions manual | DAN | 145 KB | |
| Instruction manual | ENG | 150 KB | |
| Kasutusjuhend | EST | 141 KB | |
| Käyttöohje | FIN | 140 KB | |
| Manuel d'instructions | FRA | 147 KB | |
| Betriebsanleitung | GER | 152 KB | |
| Οδηγίες χρήσης | GRE | 156 KB | |
| Handleiding | HOL | 146 KB | |
| Instruction manual / Betriebsanleitung | HRV | 145 KB | |
| Használati útmutató | HUN | 147 KB | |
| Manuale di istruzioni | ITA | 146 KB | |
| Lietošanas pamācība | LAV | 144 KB | |
| Instrukciju vadovas | LIT | 145 KB | |
| Instrukcja obsługi | POL | 148 KB | |
| Manual de instruções | POR | 148 KB | |
| Manual de utilizare | RON | 147 KB | |
| Návod na poużitie | SLK | 146 KB | |
| Navodila za uporabo | SLV | 144 KB | |
| Manual de instrucciones | SPA | 147 KB | |
| Manual | SWE | 142 KB | |
Approvals+Certificates: FB9295B3
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| EU-Declaration of Conformity / EU-Konformitätserklärung | DOC-4264 | 232 KB | |
| Certificates | |||
| EAC Lenpromexpertiza (LPE) EAC TP TC 012/2011 | TC RU C-DE.AA71.B.00261/20 | 3715 KB | |
| Europe Presafe DNV GL II 2 G ATEX | Presafe 19 ATEX 14059U | 150 KB | |
| Presafe DNV GL IECEx Certificate of Conformity | IECEx PRE 19.0014U | LINK | --- |
Function: FB9295B3
The device acts as a bus termination resistor to ensure signals are not reflected at the end of the line.
It must be used in each last station of a bus line.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.