Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Place Holder Module FB9299B3

FB9299B3
  • Parking of field circuits
  • blue screw terminal
  • Installation in suitable enclosures in Zone 1
  • Module can be exchanged under voltage (hot swap)

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  FB9299B3

Supply
Connectionbackplane bus
Ambient conditions
Shock resistanceshock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Vibration resistancefrequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles
frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Mechanical specifications
Connectionremovable front connector with screw flange (accessory)
wiring connection via spring terminals (0.14 ... 1.5 mm2) or screw terminals (0.08 ... 1.5 mm2)
Massapprox. 160 g
Dimensions57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)
General information
System informationThe module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Documents: FB9299B3

ManualsLanguageFile TypeFile Size
FB Hardware ManualENGPDF8769 KB
FB-Hardware-HandbuchGERPDF4837 KB

Approvals+Certificates: FB9299B3

CertificatesCertificate No.File TypeFile Size
Europe Presafe DNV GL II 2 G ATEXPresafe 19 ATEX 14059UPDF150 KB