Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Power supply FB9206D3

FB9206D3
  • Power supply for 24 V DC
  • Installation in suitable enclosures in Zone 1
  • Module can be exchanged under voltage (hot swap)

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  FB9206D3

Slots
Occupied slots2
Supply
Connectionwired to Ex e terminals via backplane
Maximum safe voltage Um60 V DC (SELV/PELV) common mode
Input voltage range18 ... 32 V DC (SELV/PELV)
Power dissipation4.7 W at 100 % load
3.8 W at 50 % load
Power consumptionmax. 44 W
Inrush current6 A (30 ms)
15 A (20 µs)
Output
Voltage5.4 V DC +/- 5% ,
12 V DC + 4/- 2%
PowerP5V ≤ 5.4 W, P12V ≤ 39 W - P5V
Galvanic isolation
Power supply/Outputbasic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff
Indicators/settings
LED indicationLED green: OFF in case of loss of 24V or 12V or 5V
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Conformity
Galvanic isolationEN 61010-1:2010
Degree of protectionIEC 60529
Environmental testEN 60068-2-14
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Damaging gasEN 60068-2-42
Relative humidityEN 60068-2-56
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Relative humidity95 % non-condensing
Shock resistanceshock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Vibration resistancefrequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles
frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protectionIP20 (module) , a separate housing is required acc. to the system description
Massapprox. 970 g
Dimensions57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)
Data for application in connection with hazardous areas
EU-Type Examination Certificate
MarkingEx-Hexagon II 2G Ex db eb q IIC Gb
Wait timewait time before removing the device: 7 min
For further information see instruction manual.
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013
EN 60079-1:2014
EN 60079-5:2015
EN 60079-7:2015
International approvals
ATEX approvalPresafe 19 ATEX 14059U
IECEx approval
IECEx certificateIECEx PRE 19.0014U
IECEx markingEx db eb q IIC Gb
General information
System informationThe module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Documents: FB9206D3

Instruction manualsLanguageFile TypeFile Size
ИнструкцииBULPDF151 KB
Návod k poużitíCZEPDF145 KB
Instruktions manualDANPDF145 KB
Instruction manualENGPDF151 KB
KasutusjuhendESTPDF140 KB
KäyttöohjeFINPDF140 KB
Manuel d'instructionsFRAPDF147 KB
BetriebsanleitungGERPDF152 KB
Οδηγίες χρήσηςGREPDF156 KB
HandleidingHOLPDF146 KB
Instruction manual / BetriebsanleitungHRVPDF145 KB
Használati útmutatóHUNPDF147 KB
Manuale di istruzioniITAPDF146 KB
Lietošanas pamācībaLAVPDF144 KB
Instrukciju vadovasLITPDF145 KB
Instrukcja obsługiPOLPDF148 KB
Manual de instruçõesPORPDF147 KB
Manual de utilizareRONPDF147 KB
Návod na poużitieSLKPDF146 KB
Navodila za uporaboSLVPDF145 KB
Manual de instruccionesSPAPDF148 KB
ManualSWEPDF142 KB

Approvals+Certificates: FB9206D3

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-4264PDF232 KB
Certificates
Europe Presafe DNV GL II 2 G ATEXPresafe 19 ATEX 14059UPDF150 KB