Serviceline Industrial Sensors
Serviceline Explosion Protection

Double plate sensor UDCM-30GM-085-3E3

UDCM-30GM-085-3E3
  • Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably sheet metal
  • No TEACH-IN required
  • Insensitive to printing, colors, and shining surfaces
  • Programmable

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  UDCM-30GM-085-3E3

General specifications
Sensing range50 ... 150 mm , optimal distance: 80 mm
Transducer frequency85 kHz
Indicators/operating means
LED greenindication: single sheet metal detected
LED yellowIndication: No sheet metal detected (Air)
LED redindication: double sheet metal detected
Electrical specifications
Operating voltage18 ... 30 V DC , ripple 10 %SS
No-load supply current< 200 mA
Input
Input typeFunction input
0-level: -UB ... -UB + 1V
1-level: +UB - 1 V ... +UB
Pulse length≥ 100 ms
Functionin normal operation mode, the function input has to be connected with UB+ or UB-
Impedance≥ 4 kΩ
Output
Output type3 switch outputs PNP, NC
Rated operating current3 x 100 mA , short-circuit/overload protected
Voltage drop≤ 3 V
Switch-on delayapprox. 30 ms
Switch-off delayapprox. 30 ms
Pulse extensionmin. 120 ms programmable
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CSA approvalcCSAus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature0 ... 50 °C (32 ... 122 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Connection typecable PVC , 2 m
Core cross-section0.14 mm2
Degree of protectionIP65
Material
Housingnickel plated brass; plastic components: PBT
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Mass300 g

Documents: UDCM-30GM-085-3E3

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF226 KB
Instruction manuals
Instruction Manual, Ultrasonic Double Sheet Metal MonitorENGPDF285 KB
Instruction Manual, Ultrasonic Double Sheet Metal MonitorFRAPDF298 KB
Betriebsanleitung Ultraschall Doppelblech ErkennungGERPDF269 KB

Approvals+Certificates: UDCM-30GM-085-3E3

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2947APDF239 KB
Certificates
Canada USA CSA Ordinary Location1007121PDF99 KB
US CA UL General PurposeE87056LINK---

Software: UDCM-30GM-085-3E3

Device type managersRelease InfoFile TypeFile Size
DTM UC-Prog1 + UDC devices / DTM UC-Prog1 + UDC Geräte05/2012ZIP7722 KB
Software Tools
PACTware 4.1 SP5 / PACTware 4.1 SP54.1.0.52ZIP50675 KB
PACTware 5.0 / PACTware 5.05.0.4.20ZIP50037 KB

Associated Products: UDCM-30GM-085-3E3

Accessories
Programming adapter, USB 2.0 interface, Simple insertion in the sensor connection leadfa
Mounting bracket for double sheet metal monitor, Special design to avoid reflections, Large adjustment range of sensor head spacingfa
Extension cable for UDB... and UDC...fa
Extension cable for UDB... and UDC...fa
Male cordset, M12, 5-pin, PUR cable with WAGO terminalsfa