Serviceline Industrial Sensors
Serviceline Explosion Protection

AS-Interface power supply VAN-230/500AC-K24

VAN-230/500AC-K24
  • 8 A output load
  • 200 ... 500 VAC
  • SELV
  • LED operating display
  • AS-Interface data decoupling
  • Power factor correction

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  VAN-230/500AC-K24

Product Description
AS-Interface power supply, data decoupling, 8 A
Functional safety related parameters
MTTFd40 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED OverloadRed LED
lights up for overload, flashes for hiccup mode
LED PWRLED green
Electrical specifications
Fusing3.15 AT (internal)
Capacity factor0.7 Capacitive at 400 VAC
Rated operating voltage195 ... 500 V AC
Rated operating current1 A at 400 VAC
Supply frequency47 ... 63 Hz
Efficiency87 %
Nominal voltage230/400 VAC
Peak inrush current< 50 A
Output
Current limitapprox. 8.5 A
Voltage31.2 V ±1 % 
Current8 A
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 50083-2:2006
Standard conformity
Noise immunityEN 61000-6-1:2007, EN 61000-6-2:2005
AS-InterfaceIEC 62026-2:2006
StandardsHarmonic waves: EN 61000-3-2 Class A
Interference suppression: EN 55022, EN 55011 Class B
Electrostatic discharge (ESD): IEC 61000-4-2 (8 kV contact discharge, 15 kV air discharge)
Electromagnetic fields: IEC 61000-4-3 (EN 61000-4-3; 10 V/m)
Burst: IEC 61000-4-4 (4 kV input, 2 kV output/capacitively coupled)
Surge: IEC 61000-4-5 (4 kV asymmetrical, 4 kV symmetrical)
Conducted interference: IEC 61000-4-6 (10 V, 150 kHz to 80 MHz)
Ambient conditions
Ambient temperature-10 ... 40 °C (14 ... 104 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protectionIP20
Protection classI, Protective conductor connection necessary
ConnectionConnection terminals, max. conductor cross-section
0.5  to  2.5 mm2
Stripping length 5  to  6 mm
Massapprox. 1200 g
MountingDIN mounting rail

Approvals+Certificates: VAN-230/500AC-K24

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-1807CPDF222 KB

Function: VAN-230/500AC-K24

The primarily pulsed power pack has been designed for field bus applications which transmit power and data via one single two-wire cable
(AS-Interface concept). It supplies a fully extended AS-Interface system with a 8 A output current. Sinusoidal current drain from the mains avoids harmonics.

The power factor correction feature ensures that the current and the voltage are almost cophasal to avoid reactive power and provide a cos φ > 0.6 power factor. The power pack makes available electric power. In addition to this, it provides for data isolation towards the power source and balancing of the two output lines (AS-Interface + and AS-Interface -) towards the reference potential of the machine (shield connection). Precise transformer coupling allows the use of unshielded load lines.

Fuses:

The power pack is electronically protected against external short circuits. In case of fault, the internal fusible link separates the power pack from the mains.

AS-Interface Product Range

Get to know our full range of AS-Interface products.