Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|G4 module IP65
4 inputs (PNP) and 4 electronic outputs
|Slave type||A/B slave|
|Required master specification||≥ V3.0|
|UL File Number||E223772|
|Functional safety related parameters|
|Mission Time (TM)||20 a|
|Diagnostic Coverage (DC)||0 %|
|LED PWR/FAULT||dual LED green/red
green: AS-Interface voltage
red: communication error or address 0
green/red flashing: overload sensor supply or outputs
|LED AUX||ext. auxiliary voltage UAUX ; LED green|
|LED IN||switching state (input); 4 LED yellow|
|LED OUT||Switching state (output); 4 LED yellow|
|Auxiliary voltage (output)||24 V DC ± 15 % PELV|
|Rated operating voltage||26.5 ... 31.6 V from AS-Interface|
|Rated operating current||≤ 30 mA (without sensors) / max. 230 mA|
|Surge protection||UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV)|
|Number/Type||4 inputs for 2- or 3-wire sensors (PNP), DC|
|Voltage||21 ... 31 V|
|Current loading capacity||≤ 200 mA (TB ≤ 40 °C),
≤ 160 mA (TB ≤ 60 °C), short-circuit protected
|Input current||≤ 9 mA (limited internally)|
|Switching point||according to DIN EN 61131-2 (Type 2)|
|0 (unattenuated)||≤ 3 mA|
|1 (attenuated)||≥ 5 mA|
|Number/Type||4 electronic outputs, PNP, overload and short-circuit proof|
|Supply||from external auxiliary voltage UAUX|
|Current||1 A per output, 4 A total|
|Voltage||≥ (UAUX - 0.5 V)|
|Directive 2014/30/EU||EN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001|
|Degree of protection||EN 60529:2000|
|Fieldbus standard||EN 62026-2:2013|
|Emitted interference||EN 61000-6-4:2001|
|Noise immunity||EN 61000-6-2:2001|
|Data bits (function via AS-Interface)|
|Parameter bits (programmable via AS-i)||function|
P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised
P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition
|Ambient temperature||-25 ... 60 °C (-13 ... 140 °F)|
|Storage temperature||-25 ... 85 °C (-13 ... 185 °F)|
|Relative humidity||85 % , noncondensing|
|Climatic conditions||For indoor use only|
|Altitude||≤ 2000 m above MSL|
|Degree of protection||IP65|
|Connection||cable piercing method or terminal compartment
yellow flat cable/black flat cable or standard round cable
inputs/outputs:M12 x 1.5 cable glands and cage tension spring terminals
|Housing||PA 6 GF30|
|Tightening torque, housing screws||0.8 Nm|
|Mounting||DIN rail or screw mounting|
|Instruction leaflets||Language||File Type||File Size|
|Instruction leaflet / Beipackzettel||ALL||174 KB|
|CAD||File Type||File Size|
|3-D model in IGS format / 3-D-Modell im IGS-Format||IGS||7179 KB|
|3-D model in STP format / 3-D-Modell im STP-Format||STP||2086 KB|
|CAD Portal / CAD Portal||LINK||---|
|EPLAN Data Portal / EPLAN Data Portal||LINK||---|
|EPLAN macro P+F.VBA-4E4A-G4-ZE/E2 / EPLAN-Makro P+F.VBA-4E4A-G4-ZE/E2||EDZ||385 KB|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-1008B||162 KB|
|Russia TUV GOST-R||101-KC/542||90 KB|
|US CA UL||E223772||LINK||---|
|Worldwide AS-Interface||71001||605 KB|
|Matching System Components|
The AS-Interface Module VBA-4E4A-G4-ZE/E2 has 4 inputs and 4 outputs. Both 2-wire and 3-wire sensors and also mechanical contacts can be connected to the inputs. The sensors are supplied from the module. The outputs are electronic, which can be loaded to a max. 24 V DC and 1 A per output.
The G4 Module is particularly suitable for harsh field conditions. The connections to the sensors/actuators are made via cable glands and cage spring terminals. This makes the installation particularly user-friendly. Pre-addressing can be carried out by plugging the module directly into the VBP-HH1 hand-held programming device adapter.
An LED is provided for each channel on the top of the module to indicate the current switching status. Communication monitoring is integrated in the module. In the event of faults on the bus the monitoring system switches off the current to the outputs.
Connection the AS-Interface transfer cable and the external 24 V DC supply can be achieved by means of flat or round cable. If the AS-Interface flat cable is used, the U-G1FF base component is required. The contact with the two cables is made via the AS-Interfacestandardised EEMS interface, i. e. by means of the insulation penetration technique.
If a round cable is used, the U-G1PP base component is required. This base also provides the option of connecting both the AS-Interface cable and the external power supply.
The device features communication monitoring. When this is active, it switches off the power to the outputs when no communication has occurred on the AS-Interface cable for more than 40 ms.
In the event of overloading of the internal input power supply or output supply, a signal is communicated to the AS-Interface master via the "Peripheral error" function. Communication via the AS-Interface remains uninterrupted.
The unique housing design of the new KE5 switch cabinet module enables distinct visibility and simplifies mounting, wiring, and maintenance inside switch cabinets and junction boxes.
Get to know our full range of AS-Interface products.