Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
U-G1FA
| Product Description |
| AS-Interface module mounting base with adressing jack for connection to flat cable (AS-Interface) |
| General specifications |
| UL File Number | E223772 |
| Electrical specifications |
| Current loading capacity | ≤ 2 A for max. 40 V |
| Ambient conditions |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Mechanical specifications |
| Degree of protection | IP67 according to EN 60529
(only in connection with module or cover) |
| Connection | 2 AS-Interface flat cables |
| Material | |
| Housing | PBT |
| Dimensions | about 80, 45, 20 mm (L, W, H) |
| Mounting | DIN rail or screw mounting |
Approvals+Certificates:
U-G1FA
Associated Products:
U-G1FA
| Matching system components |
|
|
|
| Illuminated pushbutton modulefa |
|
|
|
|
G4 module IP65
4 inputs for Pt100fa |
|
|
|
|
Pneumatic module
2 inputs/2 pneumatic outputsfa |
|
|
|
|
Pneumatic module
4 inputs/2 pneumatic outputsfa |
|
|
|
|
| Illuminated pushbutton modulefa |
|
|
|
|
|
| Illuminated pushbutton modulefa |
|
|
|
|
|
Pneumatic module
2 inputs/2 pneumatic outputsfa |
|
| Accessories |
|
|
|
| Cover for bases -G1F- and -G1P-fa |
|
Function:
U-G1FA
The U-G1FA lower section makes it possible to connect slaves from the G1 and G4 series to the AS-Interface without an additional power supply (EMS). It features two connections to the AS-Interface which are linked together. In this way it can serve as a distributor from one AS-Interface arm to another. When an upper section (module or VAZ-DK-G1 cover) is mounted, the flat cables are pressed into the insulation penetration blades, thus creating a contact.
Furthermore, an addressing jack is also integrated; the upper section can be addressed in the wired AS-Interface network using this jack. In this case the controller registers “Alarm Config”, as the slave is disconnected from the mains. Once the addressing jack has been removed, the controller restarts automatically again.
+49 621 776-0