Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
U-G1FFA
| Product Description |
| AS-Interface module mounting base with adressing jack for connection to flat cable (AS-Interface and external auxiliary power) |
| General specifications |
| UL File Number | E223772 |
| Electrical specifications |
| Current loading capacity | ≤ 2 A for max. 40 V |
| Ambient conditions |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Degree of protection | IP67 according to EN 60529
(only in connection with module or cover) |
| Connection | Flat cable for AS-Interface and external power supply |
| Material | |
| Housing | PBT |
| Dimensions | about 80, 45, 20 mm (L, W, H) |
| Mounting | DIN rail or screw mounting |
Approvals+Certificates:
U-G1FFA
Associated Products:
U-G1FFA
| Matching system components |
|
|
|
G4 module IP65
2 analog outputs (voltage)fa |
|
|
|
|
|
G4 module IP65
2 analog outputs (current)fa |
|
|
|
|
|
G4 module IP65
2 analog inputs (current)fa |
|
|
|
|
|
G4 module IP65
2 analog inputs (voltage)fa |
|
|
|
|
Pneumatic module
4 inputs/2 pneumatic outputsfa |
|
| Accessories |
|
|
|
| Cover for bases -G1F- and -G1P-fa |
|
Function:
U-G1FFA
The U-G1FFA base allows slaves to be connected to AS-Interface with additional supply (EEMS). It has one connection type to AS-Interface and an other one to auxiliary power, which are not interconnected. When mounting the upper part (module or cover VAZ-DK-G1) the flat cable will be pressed in the contact prongs and are thereby connected.
Moreover, an integrated addressing jack can be used to configure the upper part in the wired AS-Interface network. In this case, the controller indicates "Alarm Config", since the slave is disconnected from the supply. After removing the addressing plug, the controller restarts independently.
+49 621 776-0