Serviceline Industrial Sensors
Serviceline Explosion Protection

AS-Interface Handheld with accessory VBP-HH1-V3.0-KIT

VBP-HH1-V3.0-KIT
  • Addressing and programming AS-Interface slaves
  • Displaying the assigned slave addresses and the status of the inputs
  • Setting outputs at the AS-Interface slave
  • Also supports profiles S-7.7.A.7 (Spec 3.0), S-0.B and S-7.B (AS Interface Safety at Work)
  • The slave connection is short-circuit and overload proof
  • Battery charger included with delivery

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  VBP-HH1-V3.0-KIT

Product Description
AS-Interface Handheld with accessory
General specifications
AS-Interface specificationV3.0
Operating modePlug-in charging unit, 230 V AC, included in the delivery package
Indicators/operating means
DisplayLC display
Keyboardmembrane keys, 5 keys
Electrical specifications
Operating duration8 h or ≥ 250 read/write procedures for fully charged battery
Power supplybattery mode, please use only battery charger included with delivery to charge (charging time about 14 h)
Interface
Interface typeAS-Interface, short-circuit proof and overload-proof, or optical
Open loop voltage28 V
Load current100 mA at 25 V
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUHandheld: EN 61326-1:2013
Plug-in charging unit EN 61000-3-2:2014 , EN 61000-3-3:2013 , EN 55022:2010+AC:2011 , EN 55024:2010
Low voltage
Directive 2014/35/EUPlug-in charging unit EN 60950-1:2006+A14:2009+A1:2010+A12:2011+A2:2013
Standard conformity
Degree of protectionEN 60529:2000
Electrical safetyPlug-in charging unit EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Emitted interferenceHandheld: EN 61326-1:2013
Plug-in charging unit EN 55022:2010+AC:2011 , EN 55024:2010
Noise immunityHandheld: EN 61326-1:2013
Plug-in charging unit EN 61000-3-2:2014 , EN 61000-3-3:2013
Ambient conditions
Ambient temperature0 ... 40 °C (32 ... 104 °F)
Storage temperature-20 ... 40 °C (-4 ... 104 °F)
Mechanical specifications
Degree of protectionIP20
Material
Housingplastic
Massapprox. 1000 g

Documents: VBP-HH1-V3.0-KIT

ManualsLanguageFile TypeFile Size
Manual VBP-HH1-V3.0*ENGPDF4223 KB
Handbuch VBP-HH1-V3.0*GERPDF4235 KB
Short instructions, safety information
Quick Start Guide VBP-HH1-V3.0*ENGPDF2006 KB
Guide de démarrage rapide VBP-HH1-V3.0*FRAPDF1667 KB
Kurzanleitung VBP-HH1-V3.0*GERPDF1303 KB
Guida rapida VBP-HH1-V3.0*ITAPDF1648 KB
Guía de inicio rápido VBP-HH1-V3.0*SPAPDF1656 KB

Approvals+Certificates: VBP-HH1-V3.0-KIT

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2412CPDF162 KB

Associated Products: VBP-HH1-V3.0-KIT

Accessory of

G4 module IP65
4 inputs (PNP) and 4 electronic outputsfa

KE3 control cabinet module
4 inputs, 1 control-safe relay outputfa

G11 analog module
2 analog inputsfa

G11 analog module
4 analog outputsfa

G12 safety module
2 safety inputs and
2 standard electronic outputsfa

KE1-Safety module for the control cabinet
2 safety-related inputs and
2 conventional electronic outputsfa

KE1-Safety module for the control cabinet
2 safety-related inputs and
2 conventional electronic outputsfa

G16 compact module
4 inputs (PNP)fa

G12 flat module
4 electronic outputs (PNP)fa

G11 analog module
2 analog outputsfa

KE switch cabinet module
4 inputs (PNP)fa

KE switch cabinet module
4 inputs and 4 outputsfa

G4 module IP67
4 inputs (PNP)fa

KE1 switch cabinet module
4 inputs and 2 outputsfa

KE switch cabinet module
4 inputs (PNP) and 4 relay outputsfa

G12 flat module
2 x 4 inputs (PNP)fa

G11 module
4 inputs and 4 outputsfa

G12 flat module
4 inputs (PNP)fa

G11 module
4 inputsfa

G11 module
4 inputs and 4 outputsfa

Illuminated pushbutton modulefa

G12 flat module
4 inputs (PNP) and 4 electronic outputsfa
G11 analog module
4 analog current inputsfa
G11 analog module
2 analog outputsfa
G11 analog module
2 analog outputsfa
KE4 switch cabinet module
8 safety-related electronic outputs, each switchable with a standard output, 8 standard inputsfa
KE3 switch cabinet module
1 safety-related electronic output, 4 standard inputs, 2 standard outputsfa
KE1 safety module for the control cabinet
2 Safety-related inputsfa
G10 safety module
2 safety inputs and
1 standard electronic outputfa
G10 safety module
2 safety inputs and
1 standard electronic outputfa
KE1 switch cabinet module
4 inputs and 4 outputsfa
KE1 switch cabinet module
4 inputs and 4 outputsfa
G2 flat module
4 inputs (PNP) and 4 electronic outputsfa
G4 module IP65
4 inputs (PNP) and 4 electronic outputsfa
KE1-Safety module for the control cabinet
2 safety-related inputs and
2 conventional electronic outputsfa
G16 compact module
4 inputs (PNP) and 4 electronic outputsfa
G20 motor control module for Interroll EC310, Rulmeca BL3 and Itoh Denki PM500XKfa
G20 motor control module for Interroll EC310, Rulmeca BL3 and Itoh Denki PM500XKfa
G20 motor control module for Itoh Denki PM500XE and PM500XPfa
G20 motor control module for Interroll EC310, Rulmeca BL3 and Itoh Denki PM500XKfa
G20 module for digital inputs/outputs, 3 inputs and 3 outputsfa
G20 module for digital inputs/outputs, 4 inputs and 3 outputsfa
G20 module for digital inputs/outputs, 4 inputs and 3 outputsfa
G16 compact module 4 inputs (PNP) and 4 electronic outputsfa
G11 analog module
2 analog inputsfa
G4 module IP67
4 inputs (PNP)fa
G2 flat module
2 inputs (PNP) and 2 electronic outputsfa
G2 flat module
2 inputs (PNP) and 2 electronic outputsfa
G2 flat module
4 inputs (PNP) and 4 electronic outputsfa
Control cabinet module
Data couplerfa
KE switch cabinet module
4 inputs (PNP) and 4 relay outputsfa
Pneumatic module
4 inputs/2 pneumatic outputsfa
G12 flat module
4 inputs (PNP) and 4 electronic outputsfa
Printed circuit board module
2 NAMUR inputs and 1 electronic outputfa
G12 flat module
4 inputs (PNP) and 4 electronic outputsfa
G12 flat module
4 inputs (PNP) and 4 electronic outputsfa
G12 flat module
4 inputs (PNP)fa
G12 flat module
4 inputs (PNP) and 3 electronic outputsfa
Pneumatic module
4 inputs/2 pneumatic outputsfa
Pneumatic module
2 inputs/2 pneumatic outputsfa
G12 flat module
2 inputs (PNP) and 2 electronic outputsfa
G12 flat module
2 inputs (PNP) and 2 electronic outputsfa
Illuminated pushbutton modulefa
G4 module IP65
4 inputs for Pt100fa
Pneumatic module
2 inputs/2 pneumatic outputsfa
G4 module IP65
2 analog outputs (voltage)fa
G11 module
4 inputs and 4 outputsfa
KE switch cabinet module
4 inputs and 3 outputsfa
KE switch cabinet module
4 inputs and 3 outputsfa
Switch cabinet module
Four analog outputsfa
Cabinet module
4 inputs and 4 outputsfa
Cabinet module
4 inputs and 4 relay outputsfa
Cabinet module
4 inputs and 4 outputsfa
Cabinet module
4 inputs and 4 relay outputsfa
Switch cabinet module
2 analog Inputsfa
Cabinet module
4 inputs (PNP)fa
Switch cabinet module
Two analog outputsfa
Switch cabinet module
4 analog Inputsfa
KE switch cabinet module
4 inputs and 4 outputsfa
G4 module IP65
2 analog inputs (current)fa
G2 flat module
4 inputs and 2 electronic outputsfa
G2 flat module
2 inputs (PNP) and 2 electronic outputsfa
G2 flat module
4 inputs (PNP)fa
G2 flat module
4 inputs (PNP)fa
G2 flat module
4 inputs (PNP) and 3 electronic outputsfa
KE switch cabinet module
4 inputs (PNP) and 3 relay outputsfa
G4 module IP65
4 inputs (PNP) and 3 electronic outputsfa
G4 module IP67
2 inputs (PNP) and 2 electronic outputsfa
KE1 switch cabinet module
4 inputsfa
G4 module IP65
2 analog inputs (voltage)fa
G11 module
4 inputs and 4 outputsfa
G4 module IP65
2 analog outputs (current)fa
G12 flat module
4 inputs (PNP)fa
G11 module
2 x 4 inputsfa
Illuminated pushbutton modulefa
G11 module
4 inputs and 4 outputsfa
Illuminated pushbutton modulefa
G11 module
4 inputsfa
G12 flat module
4 inputs (PNP) and 4 electronic outputsfa
G12 flat module
4 inputs (PNP) and 4 electronic outputsfa
KE4 control cabinet module
2 inputs for incremental rotary encodersfa
KE4 switch cabinet module for rotary encoder
Adapter for 2 rotary encoder to rotation speed monitor and control panelfa
KE4 control cabinet module for rotary endocers
2 safe inputs und 2 safe outputsfa
G10 safety module
2 safety inputs and
1 standard electronic outputfa
Accessories
T-Distributor, M12 connector to M12 socket/connectorfa
Adapter cable G10 module/hand-held programming devicefa
Adapter cable G20 module/hand-held programming devicefa

Function: VBP-HH1-V3.0-KIT

The AS-Interface Handheld VBP-HH1-V3.0 is an addressing device according to the ASInterface specification 3.0.

This addressing device can be used to program AS-Interface slaves and to test part of their functions.

In addition, new functions have been incorporated:

  • Permanent data exchange with AS-Interface slaves

  • Support of the data exchange with 4E4A slaves in ext. addressing mode

  • Indication of the safety code for AS-Interface Safety-at-Work slaves

The AS-Interface connection adapter on the top of the addressing device is used for connecting AS-Interface slaves (sensors, actuators and modules) to the addressing device. The following devices and designs can be connected to the addressing device by directly plugging it onto the AS-Interface connection adapter:

Devices with M12 connector, VariKont M-system, VariKont system, FP design, AS-Interface modules of the types G1 and G4.

For device designs with integrated addressing socket, please use the optional adapter cable.

AS-Interface Product Range

Get to know our full range of AS-Interface products.