Serviceline Industrial Sensors
Serviceline Explosion Protection

WIS module secondary NDS-F146-8E2-V1

  • 8 channels
  • 8 sensor inputs
  • Fast, flexible installation/separation

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  NDS-F146-8E2-V1

Product Description
Inductive transmitter system
Nominal ratings
Sensor supply voltage12 V ± 10 % , overload and short-circuit resistant
Ripple≤ 5 %
Transfer powermax. 2.5 W (1.5 W at 5 mm)
Load step≤ 100 mA
Functional safety related parameters
MTTFd465 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Input typeInput for sensor signals
Connectable sensor typesDC, 3-wire , PNP ( switched high )
Input current≤ 1 mA
Internal resistor≥ 15 kΩ
Compliance with standards and directives
Directive conformity
EMC Directive 89/336/EECEN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature0 ... 50 °C (32 ... 122 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protectionIP65
HousingPA 66-FR
Mass140 g
General information
NoteMaximum cable length between WIS module and WIS transmitter must not exceed 5 m.

Documents: NDS-F146-8E2-V1

BrochuresLanguageFile TypeFile Size
Application report - Non-Contact, Wear-Free Signal and Power TransmissionENGPDF314 KB
Applilkationsbericht - Berührungslose Übertragung ohne Verschleiß GERPDF317 KB
Instruction leaflets
Instruction leaflet / Beipackzettel ALLPDF589 KB

Associated Products: NDS-F146-8E2-V1

Matching system components
Matching system components