Serviceline Industrial Sensors
Serviceline Explosion Protection

WirelessHART Adapter WHA-ADP-F8B2-*-P*-Z1(-Ex1)

  • 1-channel
  • Installation in Zone 1
  • WirelessHART Adapter
  • Battery operated
  • Also supplies field device
  • Input 2-wire HART transmitters and 2-wire HART current sources
  • Output WirelessHART wireless interface
  • Direct mounting on HART or 4 mA ... 20 mA field device
  • Rotatable antenna

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of WHA-ADP-F8B2-*-P*-Z1(-Ex1)

Rated voltage7.2 V DC , battery operated
Electrical specifications
Output rated operating current4 ... 20 mA
Supplyloop power for field devices
voltage 8 ... 23 V DC, adjustable in steps of 0.1 V
Connectable field devicesusable for:
- one point-to-point connection with a HART field device, or
- one point-to-point connection with a 4 ... 20 mA field device, or
- up to four externally powered HART field devices operating in multidrop mode
Connectionterminals 1, 2, 3, 4, 5, 6
multiple wirings available , depending on operating mode
Current4 ... 20 mA
HART communication
ProtocolHART 7.1, backward compatible
Number of devices- one passive 4 ... 20 mA/HART field device
- up to 4 HART field devices in multidrop mode
Transfer rate1200 Bit/s
Parametersprimary/secondary master, preambles, retries and short address scan ranges
Output variablesPV: loop current
SV, TV, QV:configurable according to user requirement
- adapter: temperature, battery voltage, energy consumed and estimated battery life-time
- 4 ... 20 mA device: scaled or linearized process value
- HART device: up to four process variables
Transfer characteristics
Accuracycurrent input: 0.125 % of measuring range
Influence of ambient temperaturecurrent input: 5 µA/K
Parameter assignment- wireless transmit power: configurable to 0 dBm or 10 dBm (EIRP)
- device variables mapping
- publishing of up to ten burst messages in a wireless network, period and trigger mode selectable
- notification of up to five events from adapter and/or connected device(s) in a wireless network
- scaling and linearization of 4 ... 20 mA signal of connected analog device
- tuning of supply parameters for the connected device
- locking/unlocking of device parameterization
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Radio and telecommunication terminal equipmentThe usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.
Directive 99/5/ECETSI EN 300328: V1.7.1 (2006-10), ETSI EN 301489-17: V1.2.1 (2002-08), EN 60950:2001
FCC CFR47 Part 15 B and CANSI C63.4-2003
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Vibration resistance20 ... 2000 Hz, 0,01 g2/Hz
Corrosion resistanceacc. to ISA-S71.04-1985, severity level G3
test setup and execution acc. to EN 60068-2-60
Mechanical specifications
Degree of protectionIP66
Massapprox. 750 g
Dimensions91 x 88.5 x 100.6 mm (3.6 x 3.5 x 4 inch) (without cable glands and antenna)
Mountingmounting on field device , panel or pole mounting
versions see type code
Data for application in connection with hazardous areas
EC-Type Examination CertificateBVS 11 ATEX E 081 , for additional certificates see
Group, category, type of protection, temperature classEx-Hexagon II 2 G Ex ia IIC T4 Gb
Directive conformity
Directive 94/9/ECEN 60079-0:2009 , EN 60079-11:2007 , EN 60079-31:2009
International approvals
IECEx approvalBVS 11.0061
Designationbattery W-BAT-B2-Li mandatory for use in connection with hazardous areas (order separately)
mounting set W-ACC-MKF8

Documents: WHA-ADP-F8B2-*-P*-Z1(-Ex1)

ManualsLanguageFile TypeFile Size
Manual WirelessHART Adapter WHA-ADP-F8B2-*-**-Z1(-EX1)ENGPDF3318 KB
Instructions, short instructions, safety information
Instruction manualENGPDF65 KB
Quick Start Guide WirelessHART NetworkENGPDF2045 KB
BetriebsanleitungGERPDF66 KB
Kurzanleitung WirelessHART NetzwerkGERPDF2049 KB
Product information
Software Release Notes WHA-ADPENGPDF42 KB
EU-Declaration of conformity / EU-KonformitätserklärungALLPDF240 KB

Approvals+Certificates: WHA-ADP-F8B2-*-P*-Z1(-Ex1)

CertificatesCertificate No.File TypeFile Size
Canada USA CSACoC 2535301 PDF114 KB
China Radio ApprovalCMIIT 2012 DJ 3836PDF839 KB
DEKRA EXAM IECEx Certificate of ConformityIECEx BVS 11.0061LINK---
Europe DEKRA EXAM ATEX Category 2 D ATEX Category 2 GBVS 11 ATEX E 081PDF3178 KB
India Radio ApprovalETA 2025/2012/WRLOPDF660 KB
Japan CETECOM ICT Radio / Connection202-LSA063 / D 12-0050-202PDF175 KB
Korea Radio ApprovalKCC-RRM-PFG-WHA-ADPPDF706 KB

Software: WHA-ADP-F8B2-*-P*-Z1(-Ex1)

DriversRelease InfoFile TypeFile Size
DD Collection for WirelessHART / DD Collection für WirelessHART1.0.1.0ZIP2377 KB
Device type managers
DTM Collection WirelessHART V1.0.0.29 / DTM Collection WirelessHART V1.0.0.29ZIP20226 KB

Associated Products: WHA-ADP-F8B2-*-P*-Z1(-Ex1)

Matching system components
EtherNet/IP WirelessHART Gateway, Graphical network analysis, Simple and automatic configuration options, Ethernet and RS 485 interface, HART protocol via both interfaces, EtherNet/IP protocol via Ethernet interface, Input WirelessHART wireless interface, 24 V DC supply, Redundant power supply connectionspa
MODBUS WirelessHART Gateway, Graphical network analysis, Simple and automatic configuration options, Ethernet and RS 485 interface, HART and MODBUS protocol via both interfaces, Input WirelessHART wireless interface, 24 V DC supply, Redundant power supply connectionspa
WirelessHART Adapter BULLET

WirelessHART Adapter "BULLET"

The BULLET is the only WirelessHART adapter on the market in an Ex d housing. Simply connect the BULLET to your field device and enable efficient, wireless signal transmission.