Control interface unit IC-KP-B6-V15B
- Max. 4 read/write heads connectable
- Alternative 2 read/write heads and 2 trigger sensors can be connected
- LC display with background lightning
- Direct operation via 4 keys
- LED status indicator of bus communication and read/write heads
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of IC-KP-B6-V15B
| Product Description | ||
|---|---|---|
| Control interface unit IDENTControl with PROFIBUS DP interface | ||
| General specifications | ||
|---|---|---|
| Number of read/write heads | max. 4 alternative 2 read/write heads and 2 trigger sensors |
|
| UL File Number | E87056 | |
| Indicators/operating means | ||
| LEDs 1, 2, 3, 4 | Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
|
| LED PWR/ERR | green: power on red: Hardware fault |
|
| LED UL | green: Interface Power ON/OK | |
| LED Bus Error | red: Bus error | |
| LED Data Exch | green: Slave is at state "Data Exchange" | |
| LED DPV1 | Yellow: not used | |
| LC display | two-line multi-function display with 12 characters per line configuration of the control interface and display of connected read/write heads as additional pictograms; easy and direct selection of operating commands and addressing |
|
| Button | 4 keys: ESC, up, down and return | |
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , PELV | |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 2 A incl. read/write heads | |
| Power consumption | 3.5 W Without read/write heads | |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff | |
| Interface | ||
| Physical | RS-485 | |
| Protocol | PROFIBUS DP acc. to EN 50170 | |
| Transfer rate | 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 | |
| Standard conformity | ||
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -30 ... 80 °C (-22 ... 176 °F) | |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
|
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
|
| Mechanical specifications | ||
| Housing length | 148 mm | |
| Housing width | 105 mm | |
| Housing height | 73 mm | |
| Degree of protection | IP67 | |
| Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M6 earthing screw PROFIBUS: M12 connector, B-coded |
|
| Material | ||
| Housing | powder coated aluminum | |
| Installation | snap-on to 35 mm standard rail or screw fixing | |
| Mass | approx. 1000 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Documents: IC-KP-B6-V15B
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual Communication IRI/IVI mode | ENG | 2721 KB | |
| Manual IC-KP-B6-V15B | ENG | 3394 KB | |
| Manual Read / Write Ranges and Passing Speeds RFID | ENG | 3640 KB | |
| Handbuch IC-KP-B6-V15B | GER | 3392 KB | |
| Handbuch Kommunikation IRI/IVI-Modus | GER | 506 KB | |
| Handbuch Schreib- und Leseabstände und Vorbeifahrgeschwindigkeiten RFID | GER | 3642 KB | |
| Instruction leaflets | |||
| Device mounting / Gerätemontage | ALL | 917 KB | |
| Short instructions, safety information | |||
| Quick Start Guide IC-KP-* | ENG | 1019 KB | |
| Kurzanleitung IC-KP-* | GER | 1014 KB | |
| Application reports | |||
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB | |
| Applikationsbericht - RFID-Systeme beim industriellen Metallstanzen | GER | 716 KB | |
CAD+CAE: IC-KP-B6-V15B
| CAD | File Type | File Size | |
|---|---|---|---|
| 3-D model / 3-D-Modell | STP | 7111 KB | |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: IC-KP-B6-V15B
| Certificates | Certificate No. | File Type | File Size |
|---|---|---|---|
| Australia Declaration of Conformity | ACMA Supplier's declaration of conformity | 734 KB | |
| Canada, USA UL | CoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0 | 561 KB | |
| Korea Radio Approval | MSIP-REI-PF1-ICKPB6V15B | 362 KB | |
| Declaration of Conformity | |||
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-1845C | 108 KB | |
| UK-Declaration of conformity / UK-Konformitätserklärung | DOC-7045 | 107 KB | |
Commissioning: IC-KP-B6-V15B
Software: IC-KP-B6-V15B
| Device Driver | Release Info | File Type | File Size |
|---|---|---|---|
| GSD file IC-KP-B6-... / GSD-Datei IC-KP-B6-... | 11/2005 | ZIP | 6 KB |
Associated Products: IC-KP-B6-V15B
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Function: IC-KP-B6-V15B
The innovative concept of the RFID identification system IDENTControl from Pepperl+ Fuchs has many advantages in comparison to other systems. The core piece of the system is the evaluation unit IDENTControl.
Thanks to the integrated interfaces for all standard field bus systems such as PROFIBUS, EtherNet, PROFINET IO, DeviceNet, serial connections (RS 232/RS 485/RS 422) and numerous connection options for inductive write/read heads as well as microwave antennas, the evaluation unit IDENTControl can be adjusted to your needs in a flexible and easy manner.
LEDs indicate operating power and bus communication, connected write/read heads and active write/read commands.
Mounting the unit onto DIN mounting rails is easy thanks to the snap-fits on the back of the housing of the evaluation unit IDENTControl .
With its L-shaped housing, the evaluation unit including bus connector fits into a 120 mm grid in the switch cabinet. The mounting depth of 70 mm furthermore enables installation in flat switch boxes with a depth of only 100 mm.
There are 3 further mounting holes for field mounting.
Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.