Serviceline Industrial Sensors
Serviceline Explosion Protection

Base for read/write station U-P6-B6-V15B

U-P6-B6-V15B
  • PROFIBUS DP acc. to EN 50170
  • M12 round connection for supply
  • M12 round connection for BUS (B-coded)
  • Complete read/write functionality via the PROFIBUS DP
  • Transmission of up to 7 double words, 32 bit each, in one cycle
  • Connectable bus termination
  • Field device with degree of protection IP67

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  U-P6-B6-V15B

Product Description
Base for PROFIBUS DP, plug-in connection
Indicators/operating means
DIP switchSetting the station address
bus connection
ON = active  OFF = non-active
Electrical specifications
Rated operating voltage20 ... 30 V DC , ripple 10 %SS , PELV
Power consumptionmax. 5 W with read/write head IPT*-FP
Galvanic isolation
Operating voltage/interfacefunctional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff
Interface
Physical RS-485
ProtocolPROFIBUS DP acc. to EN 50170
Transfer rate9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s
3; 6; 12 Mbit/s self-synchronizing
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Climatic conditionsair humidity max. 95 %
Mechanical specifications
Degree of protectionIP67 according to EN 60529 with IPT*-FP
Connection4-pin, M12 x 1 connector for supply;
M12 x 1 device socket, 5-pin, B-coded for PROFIBUS
Material
Housingaluminum, black anodized
Dimensions
Height50 mm
Width80 mm
Length161 mm

Classifications

SystemClasscode
ECLASS 13.027280492
ECLASS 12.027280490
ECLASS 11.027280490
ECLASS 10.0.127280490
ECLASS 9.027280490
ECLASS 8.027280490
ECLASS 5.127279212
ETIM 9.0EC002997
ETIM 8.0EC002997
ETIM 7.0EC002997
ETIM 6.0EC002997
ETIM 5.0EC003015
UNSPSC 12.131162301

Details: U-P6-B6-V15B

Function

The base is used in combination with an upper part, the IPT*-FP read/write station.

The device is operated as a slave on the PROFIBUS DP. The device makes available the complete read/write functionality. Up to 32 bytes are transmitted per cycle. Of these, up to 7 double words, each with 32 bits, are available to the user.

The rounded connector M12 for BUS and supply allows a rapid assembly.

Product Documentation: U-P6-B6-V15B

Language Selection:
Brief InstructionsLanguageFile TypeFile Size
Instruction leaflet / BeipackzettelALLPDF171 KB
Programming Proposal in "Enhanced Buffered Read FIXCODE" ModeENGPDF96 KB
Programming Proposal in "Enhanced Buffered Read" ModeENGPDF96 KB
Manuals
Manual IPTx-FP with U-P6x-B6xENGPDF2364 KB

Design / Simulation: U-P6-B6-V15B

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP450 KB
CAD Portal / CAD PortalALLLINK---

Approvals: U-P6-B6-V15B

Language Selection:
Declaration of ConformityCertificate No.LanguageFile TypeFile Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-5411ALLPDF108 KB

Associated Products: U-P6-B6-V15B

Matching System Components
LF R/W system, fully assembled as configuration and test stationfa
Accessories
Terminal resistor for PROFIBUSfa
Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …