Serviceline Industrial Sensors
Serviceline Explosion Protection

Base for read/write station U-P3-RX

  • Degree of protection IP67
  • With serial interfaces RS 232 and RS 485

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  U-P3-RX

Product Description
Base with serial interfaces RS 232 and RS 485
Electrical specifications
Rated operating voltage20 ... 30 V DC , ripple 10 %SS , PELV
Power consumptionmax. 4 W with read/write head IPT*-FP
Galvanic isolation
Operating voltage/interfacefunctional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff
Physical RS-232/RS-485
Transfer rate1200; 2400; 4800; 9600; 19200; 38400
Cable length≤ 15 m at RS 232
≤ 1200 m at RS-485
Approvals and certificates
EAC conformityTR CU 020/2011
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP67 according to EN 60529 with IPT*-FP
Connectionscrew terminals
Interface cable3 conductor, acc. to RS-232 or 2 acc. to RS-485
Supplyup to 3 x 1.5 mm2
Housingdiecast aluminum

Documents: U-P3-RX

ManualsLanguageFile TypeFile Size
Manual IPTx-FP with U-Px-RXENGPDF1748 KB
Handbuch IPTx-FP mit U-Px-RXGERPDF1781 KB
Instruction leaflets
Instruction leaflet / Beipackzettel ALLPDF390 KB

Approvals+Certificates: U-P3-RX

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3575PDF162 KB
Russia TUV GOST-R101-KC/542PDF90 KB

Commissioning: U-P3-RX

Commissioning examplesLanguageFile TypeFile Size
Commissioning IPT-FP with U-P3-RX at S7-300ENGPDF971 KB
Inbetriebnahme IPT-FP mit U-P3-RX an S7-300GERPDF864 KB

Associated Products: U-P3-RX

Matching system components
LF R/W system, fully assembled as configuration and test stationfa
Software for RFID identification systemsfa

Function: U-P3-RX

The base is used in combination with an upper part, the IPT*-FP read/write station. Either an RS 232- or an RS 485-interface is available.

The read/write station is connected to a higher-order control system via the serial interface and receives the commands for writing and/or reading code or data carriers via this interface.

Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …