General specifications |
Operating frequency | 13.56 MHz |
Transfer rate | 26 kBit/s |
Sensing range | |
| Read distance | 0 ... 55 mm |
| Write distance | 0 ... 55 mm |
| Width | max. 45 mm |
UL File Number | E87056 |
Electrical specifications |
Power consumption | ≤ 1.3 W |
Supply | from the IDENTControl |
Compliance with standards and directives |
Directive conformity | |
| R&TTE Directive 1995/5/EC | EN 301489-1 V1.8.1 (2008-04), EN 301489-3 V1.4.1 (2002-08), EN 300330-2 V1.3.1 (2006-04), EN 60950-1:2006 |
Standard conformity | |
| Electromagnetic compatibility | EN 61000-6-2, EN 61000-6-4 |
| Degree of protection | EN 60529 |
| RFID | ISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC 18000-3 |
Approvals and certificates |
FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
Radio approval | USA: FCC IREIQH1-F61-V1 |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | M12 x 1 connector |
Material | |
| Housing | ABS |
| Encapsulation compound | WEVO 403FL/300 |
Installation | |
| Distance between two heads | Multiplex on: ≥ 100 mm Multiplex off: ≥ 150 mm |
Mass | approx. 60 g |
Cable length | 20 cm |