Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Read/write head IQH1-FP-V1

IQH1-FP-V1
  • Operating frequency 13.56 MHz
  • Conforms to ISO 15693
  • Suitable for FRAM transponder
  • Dual-LED for function display
  • Connection via V1 (M12 x 1) plug connection
  • Degree of protection IP67
  • For connection to IDENTControl control interface

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of IQH1-FP-V1

Product Description
HF read/write head, ISO 15693, for IDENTControl
General specifications
Operating frequency13.56 MHz
Transfer rate26 kBit/s
Sensing range
Read distance0 ... 130 mm
Write distance0 ... 130 mm
Widthmax. 100 mm
UL File NumberE87056
Functional safety related parameters
MTTFd680 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED green/yellowgreen: power on
green flashing: read/write attempt performed
yellow: data carrier detected
Electrical specifications
Power consumption≤ 1.3 W
Supplyfrom the IDENTControl
Compliance with standards and directives
Directive conformity
R&TTE Directive 1995/5/ECEN 301489-1 V1.8.1 (2008-04), EN 301489-3 V1.4.1 (2002-08), EN 300330-2 V1.3.1 (2006-04), EN 60950-1:2006
Standard conformity
Electromagnetic compatibilityEN 61000-6-2, EN 61000-6-4
Degree of protectionEN 60529
RFIDISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC 18000-3 ,
Approvals and certificates
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionIP67
ConnectionM12 x 1 connector
Material
HousingPBT
Basediecast aluminum
Encapsulation compoundCY 221/HY 2966
Installation
Distance between two headsMultiplex on: ≥ 100 mm
Multiplex off: ≥ 150 mm
Massapprox. 380 g

Documents: IQH1-FP-V1

ManualsLanguageFile TypeFile Size
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB
Handbuch Schreib- und Leseabstände und Vorbeifahrgeschwindigkeiten RFIDGERPDF3642 KB
Instructions, short instructions, safety information
Simplified EU Declaration of Conformity / Vereinfachte EU-KonformitätserklärungALLPDF75 KB

Approvals+Certificates: IQH1-FP-V1

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-1864APDF162 KB
Certificates
Australia Pepperl+FuchsACMA Supplier's declaration of conformityPDF328 KB
Japan Radio ApprovalCERT-3127PDF243 KB
Russia TUV GOST-R101-KC/542PDF90 KB
USA FCC ApprovalIREIQH1-FP-V1PDF64 KB

Associated Products: IQH1-FP-V1

Accessories

Data carrierfa

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa
Data carrierfa
Data carrierfa
Data carrierfa
Mounting bracketfa
Data carrierfa
Data carrierfa
Visit the RFID Hub

Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …