Serviceline Industrial Sensors
Serviceline Explosion Protection

Read/write head for hazardous areas IUH-F190-FR2-02-20M-C1D1

IUH-F190-FR2-02-20M-C1D1
  • Explosion-proof housing
  • Most flexible midrange UHF read/write head for worldwide use
  • Ready-made PLC function blocks designed for quick and easy system integration
  • Compact and robust housing for harsh industrial environments
  • Switchable antenna polarization guarantees reliable tag detection and enhances process flow
  • Multi-tag reading of up to 40 tags ensures increased productivity
  • Approved for Class I, Groups B, C, D

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  IUH-F190-FR2-02-20M-C1D1

Product Description
UHF read/write head for hazardous areas, for IDENTControl, Canada, USA, and Mexico
General specifications
Operating frequency902 … 928 MHz: USA, Canada, Mexico, Colombia
Transmission licenses for other countries on request
Emitted power50 ... 500 mW EIRP adjustable
UL File NumberE254700
Indicators/operating means
LED greenPower on
LED yellowRead/write operation successful
LED blueTransmission mode
Electrical specifications
Power consumption≤ 7 W
Supplyfrom the IDENTControl
Compliance with standards and directives
Standard conformity
Electromagnetic compatibilityEN 301489-1 V1.9.2:2011
EN 301489-3 V1.4.1:2003
SafetyEN 60950-1:2006/A1:2010
Degree of protectionEN 60529:2000
Approvals and certificates
UL approvalClass I, Division 1, Groups B, C, D
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Radio approvalUSA: FCC IREIUH-F190-V1
Canada: IC 13-116260
Mexico: RCPPEIU 14-2030
Colombia: 201580046
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F) (Operation with nontransmission periods, adjustable)
-25 ... 50 °C (-13 ... 122 °F) (Continuous transmission mode)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protectionNEMA Type 4, 7, 9
ConnectionM12 x 1 connector
Material
Housingdiecast aluminum
Basediecast aluminum
Massapprox. 7720 g
Dimensions
Height165 mm
Width267 mm
Length197 mm
Cable length20 m

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IUH-F190-FR2-02-20M-C1D1

Function

The compact IUH-F190-FR2-02-20M-C1D1 read/write head operates in the UHF frequency range and is optimized for use in industrial applications involving ranges up to 1m. The device reads and writes passive tags according to EPC Generation 2 (ISO/IEC 18000-63). The read/write head can be operated in the USA, Canada, and Mexico. The read/write head complies with the respective radio regulations.

A wide range of options is supported for filtering data. The read/write head is connected to the IDENTControl interface using an M12 connector. The user can monitor the status of the read/write head using the integrated LEDs. The read/write head has a typical detection range of approx. 1 meter; this range is determined by the tag used and can be changed by adjusting the transmission power. Other influencing factors are the application-specific setup and surrounding materials, particularly metal. The read and write distances measured under ideal conditions can be found in a separate document. For the actual read and write distances under real conditions, the combination of read/write head and tag must be tested in the intended application.

This explosion-proof unit comes with a 20 m M12 straight pigtail pre-attached to the unit. The cable can be fed directly through a straight piece of conduit, or the M12 connector can be cut off and reconnected at the final destination after the cable has been fed through the conduit.

The conduit seal comes already poured so that no hazardous gasses can enter the enclosure by way of the conduit fitting. Removing the cover is not necessary but can be done if the read head IUH-F190-V1-FR2-02 needs to be replaced in the future.

Informative Literature: IUH-F190-FR2-02-20M-C1D1

Language Selection:
LiteratureLanguageFile TypeFile Size
Product Information - RFID UHF-F190 PortfolioENGPDF853 KB
Application Report - Clear Identification of Green Tires During VulcanizationENGPDF320 KB
Application Report - Synchronous Detection of Various Objects on Load CarriersENGPDF332 KB

Product Documentation: IUH-F190-FR2-02-20M-C1D1

Language Selection:
Brief InstructionsLanguageFile TypeFile Size
Brief Instructions - IUH-F190-V1*ENGPDF1810 KB
Manuals
Manual IUH-F190-V1-*ENGPDF4328 KB
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB

Design / Simulation: IUH-F190-FR2-02-20M-C1D1

Language Selection:
CADLanguageFile TypeFile Size
CAD 2-D / CAD 2-DALLZIP726 KB

Approvals: IUH-F190-FR2-02-20M-C1D1

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
CA Radio ApprovalCanada 13-116260ALLPDF32 KB
Canada, USA ULE468231ALLLINK---
Radio ApprovalNYCE/CT/1343/14/TSALLPDF131 KB
USA FCC ApprovalUSA IREIUH-F190-V1ALLPDF64 KB

Associated Products: IUH-F190-FR2-02-20M-C1D1

Accessories

IDENTControl control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa

IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa

Control interface unit IDENTControl Compact with interface for PROFIBUS DPfa

Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485fa

IDENTControl Compact RFID evaluation unit with EtherCAT interfacefa
IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa
Control interface unit IDENTControl Compact with interface for PROFIBUS DPfa
Control interface unit IDENTControl Compact with interface for PROFIBUS DPfa
Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485fa
RFID Transponderfa
RFID Transponderfa
Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …