Serviceline Industrial Sensors
Serviceline Explosion Protection

Field-attachable male connector V1S-G-Q3

  • Time-saving assembly with QUICKON-ONE technique

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  V1S-G-Q3

Product Description
Field-attachable male QUICKON-ONE connector
General specifications
Number of pins4
Connection 1Male connector
Construction type 1straight
Threading 1M12
UL File NumberE191152
Electrical specifications
Operating voltagemax. 125 V
Operating currentmax. 4 A
Volume resistance< 5 mΩ
Ambient conditions
Ambient temperature-25 ... 80 °C (-13 ... 176 °F)
Pollution degree3
Mechanical specifications
Degree of protectionIP65/IP67
Contact surfaceNi/Au
BodyPA 66, black
Sleeve connectorplastic
Core insulationPVC/PE/PP
Sheath diameter3.5 ... 6 mm
Cores∅ 0.7 ... 1.6 mm incl. insulation
Cross-section: 0.14 ... 0.34 mm2
Cable construction: Class 2-6 in accordance with VDE 0295
MountingMax. tightening torque on the coupling nut: ≤ 0.8 Nm
Flammability94 V-0
Notemax. 10 connections possible to a cable of the same cross-section. After repeated cable connection it may be necessary to renew the seal and cap.

Approvals+Certificates: V1S-G-Q3

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4661APDF340 KB

Function: V1S-G-Q3

It normally takes a lot of time to connect freely configurable M12 round connectors to the sensor cable. QUICKON can reduce this time to a minimum; the individual wire conductors do not have to be stripped anymore. For contacting, a blade contact cuts through the conductor insulation and applies contact to the wire strands. This contact is spring-loaded, vibration-proof and gas-tight.

The QUICKON M12 connector is available as a female or male 4-pin straight plug. In this way, individual sensor-actuator cables with several wires can be put together quickly and economically.