Serviceline Industrial Sensors
Serviceline Explosion Protection

Connecting cable CBL-IDMx60-D-J1-S-C38-N0

  • Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices
  • Approved for Zone 1 + 21 (ATEX + IECEx)
  • Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector)
  • M12 male connector to RJ50 connector with additional sealing ring

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of  CBL-IDMx60-D-J1-S-C38-N0

Product Description
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers
General specifications
Mechanical specifications
ConnectionRJ50 (reader) connector with additional sealing ring to M12 male connector
Cable lengthmax. 3 m, fully extended


ECLASS 11.019209290
ECLASS 10.0.119209290
ECLASS 9.019209290
ECLASS 8.019209290
ECLASS 5.127242392
ETIM 8.0EC001855
ETIM 7.0EC001855
ETIM 6.0EC001855
ETIM 5.0EC001855

Associated Products: CBL-IDMx60-D-J1-S-C38-N0

Accessory of
Corded 1-D and 2-D Handheld Reader for Zone 1/21 , Approved for Zone 1 and 21 (ATEX and IECEx), All 1-D standard barcode families supported, 2-D model supports Data Matrix, QR, and other two-dimensional codes, Fall tested from 2 m to ensure reliabilitypa
Power supply for IDM-Z1-* handheld readers and base station, AC and DC power supplies for IDM-Z1-* handheld readers and base station, Enable operation in Zone 1/21, Sturdy aluminum housingpa
1 m connector cable for corded handheld reader with M12 connector to open cable end, Connector cable for wired 1-D Scanner IDM-Z1-160-D-1D-J1-S-* and 2-D Scanner IDM-Z1-260-D-2D-J1-S* and Bluetooth Basestation IDM-Z1-x61-B-J1-BT-N0, 4-wire with ferrules, IDM Scanner connection via M12-connector, Note: Supports only RS232 Scanner/Basestationpa

Function: CBL-IDMx60-D-J1-S-C38-N0

CBL-IDMx60-D-* cables allow plug-and-play connection of the corded IDM-Z1-x60-D-* handheld Barcode Readers in combination with the DATL-IDM-DBS-XX00-N0 (only Serial RS232 Scanners and Basestations are supported) cable or SK-IDM-Z1-* supply module to Pepperl+Fuchs thin client / PC units, even in hazardous locations. The cable ends consist of an RJ50 (Reader) connector with additional sealing ring and a M12 male connector.