Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
KLD2-FBPS-1.25.360
General specifications |
Design / Mounting | Cabinet installation |
Supply |
Connection | Power Rail or terminals 8+, 11+; 9-, 12- |
Rated voltage | 19.2 ... 35 V DC |
Rated current | 630 ... 340 mA |
Power dissipation | typ. 2,0 W |
Fieldbus connection |
Connection | terminals 3+, 6+; 2-, 5-; 1S, 4S (S=screen connection) |
Rated voltage | 25 ... 27 V |
Rated current | 360 mA |
Galvanic isolation |
Fieldbus segment/Supply | functional insulation acc. to IEC 62103, rated insulation voltage 250 V AC |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 |
Standard conformity |
Electromagnetic compatibility | NE 21:2006 |
Degree of protection | IEC/EN 60529 |
Fieldbus standard | IEC 61158-2, ISA S 50.02 part 2 |
Shock resistance | EN 60068-2-27 |
Vibration resistance | EN 60068-2-6 |
Ambient conditions |
Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Relative humidity | < 95 % non-condensing |
Shock resistance | 15 g 11 ms |
Vibration resistance | 1 g , 10 ... 150 Hz |
Pollution degree | max. 2, according to IEC 60664 |
Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
Mechanical specifications |
Connection type | Terminals |
Core cross-section | up to 2.5 mm2 |
Housing | 20 mm x 115 mm x 107 mm |
Housing material | Polycarbonate |
Degree of protection | IP20 |
Mass | approx. 210 g |
Mounting | DIN rail mounting |
Data for application in connection with hazardous areas |
Certificate | TÜV 06 ATEX 553079 X |
| Marking | II 3G Ex ec IIC T4 Gc |
Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-7:2015 |
International approvals |
FM approval | |
| FM certificate | FM 19 US 0015 X and FM 19 CA 0011 X |
| FM marking | AEx/Ex ec IIC T4 |
Certificates and approvals |
Marine approval | DNV A-14038 |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Classifications
System | Classcode |
ECLASS 11.0 | 27242611 |
ECLASS 10.0.1 | 27242611 |
ECLASS 9.0 | 27242611 |
ECLASS 8.0 | 27242611 |
ECLASS 5.1 | 27242611 |
ETIM 8.0 | EC002583 |
ETIM 7.0 | EC002583 |
ETIM 6.0 | EC002583 |
ETIM 5.0 | EC001604 |
UNSPSC 12.1 | 39121004 |
Documents:
KLD2-FBPS-1.25.360
CAD+CAE:
KLD2-FBPS-1.25.360
Approvals+Certificates:
KLD2-FBPS-1.25.360
Associated Products:
KLD2-FBPS-1.25.360
Matching System Components |
|
|
|
Starter Kit for FOUNDATION Fieldbus H1 Infrastructure, Complete hardware for connection of FOUNDATION Fieldbus H1 field devices to the host system of your choice, Output: 25 ... 28 V/360 mA, Connection of 6 field devices with individual short-circuit protection, High-power trunk for high device count and long cable lengths, Device coupler location: non-explosion hazardous area, Instrument location / spur protection: non-explosion hazardous area, Function: Starter kitpa |
|
Accessories |
|
|
|
35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa |
|
|
|
|
Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa |
|
|
|
|
Interface for Power Rail, Used for redundant configuration, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa |
|
|
|
|
Alternative power supply, Nominal current 4 A, Simple installation, Standard length 50 cm, can be shortened to any length in 4 cm steps, Terminating insulation by end cap, included in the delivery package, With 2 leads for voltage supply and 1 lead for centralized error messagespa |
|
Function:
KLD2-FBPS-1.25.360
This fieldbus power supply is an all-in-one module for single fieldbus segments. It adapts current and voltage and provides the impedance filter required. Reliability of communication is enhanced through galvanic isolation between segment and bulk power supply.
Power output is designed for long cable lengths and device counts suiting the needs of most fieldbus applications. Fieldbus couplers provide explosion protection for live work at the spur where needed.
Availability and a long service life are achieved through a passive impedance filter and a design optimized for low heat dissipation. Modules can be mounted with no spacing required in any direction for an optimized and space-saving cabinet layout. The mobile Advanced Diagnostic Module connects directly to test plug sockets located on the plug-in terminal. In conjunction with the modular Segment Protector it is a perfectly expandable solution.