Voltage adjustment module KLD0-SAA
- Series voltage reducing module
- Removable terminals
- Polarity reversal protected
- Installation in cabinet on DIN mounting rail
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of KLD0-SAA
| General specifications | ||
|---|---|---|
| Design / Mounting | Cabinet installation | |
| Fieldbus connection | ||
| Field-side | ||
| Connection | terminals 10+, 11-, 12S | |
| Rated voltage | Uin - Uout 0.9 ... 1.8 V | |
| Rated current | max. 1 A | |
| Host-side | ||
| Connection | terminals 7+, 8-, 9S | |
| Rated voltage | 9 ... 32 V DC | |
| Rated current | max. 1 A | |
| Power dissipation | max. 1.8 W | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | < 75 % | |
| Pollution degree | max. 2, according to IEC 60664 | |
| Mechanical specifications | ||
| Connection type | Terminals | |
| Core cross-section | up to 2.5 mm2 | |
| Housing | 20 mm x 115 mm x 107 mm | |
| Degree of protection | IP20 | |
| Mass | approx. 100 g | |
| Mounting | DIN rail mounting | |
| Data for application in connection with hazardous areas | ||
| Statement of conformity | PF 16 CERT 1030 X | |
| Group, category, type of protection |  II 3 G Ex ec IIC T4 Gc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-7:2015 | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 11.0 | 27242601 |
| ECLASS 10.0.1 | 27242601 |
| ECLASS 9.0 | 27242601 |
| ECLASS 8.0 | 27242601 |
| ECLASS 5.1 | 27242601 |
| ETIM 8.0 | EC001601 |
| ETIM 7.0 | EC001601 |
| ETIM 6.0 | EC001601 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Documents: KLD0-SAA
| Instruction manuals | Language | File Type | File Size |
|---|---|---|---|
| Инструкции | BUL | 131 KB | |
| Návod k poużití | CZE | 0 KB | |
| Instruktions manual | DAN | 0 KB | |
| Instruction manual | ENG | 51 KB | |
| Kasutusjuhend | EST | 122 KB | |
| Käyttöohje | FIN | 122 KB | |
| Manuel d'instructions | FRA | 54 KB | |
| Betriebsanleitung | GER | 53 KB | |
| Οδηγίες χρήσης | GRE | 134 KB | |
| Handleiding | HOL | 126 KB | |
| Instruction manual / Betriebsanleitung | HRV | 125 KB | |
| Használati útmutató | HUN | 127 KB | |
| Manuale di istruzioni | ITA | 51 KB | |
| Lietošanas pamācība | LAV | 0 KB | |
| Instrukciju vadovas | LIT | 126 KB | |
| Instrukcja obsługi | POL | 0 KB | |
| Manual de instruções | POR | 126 KB | |
| Manual de utilizare | RON | 126 KB | |
| Návod na poużitie | SLK | 0 KB | |
| Navodila za uporabo | SLV | 0 KB | |
| Manual de instrucciones | SPA | 53 KB | |
| Manual | SWE | 0 KB |
Approvals+Certificates: KLD0-SAA
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-2528B | 89 KB | |
| Certificates | |||
| Europe Pepperl+Fuchs ATEX Category 3 G Declaration of Conformity | PF16CERT1030X | 192 KB | |
Function: KLD0-SAA
Pepperl+Fuchs Segment Protectors feature a safety switch off for explosion protection at typically 31.5 V.
In rare cases the tolerances in other manufacturers’ power modules in combination with very short cable lengths with little or no voltage drop lead to a switch off of the Segment Protector.
The KLD0-SAA is used to limit the voltage to uncritical values.
The KLD0-SAA is installed in close proximity to the power supply within the control cabinet.
Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …
From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …
The Quick Select Product Guide for interface technology, FieldConnex®, and remote I/O connection technologies will help you select the right technology and systems when designing plants.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.