Power-Link KLD2-PL-Ex1.PA
- PROFIBUS PA according to EN 50170/2 and IEC 61158-2; 31,25 kbit/s
- Up to 10 Ex devices can be connected to the PA segment
- Supply via Power Rail
- 24 V DC rated operating voltage
- Removable terminals and Power Rail
- EMC acc. to NAMUR NE 21
- Field circuit in the hazardous area EEx ia IIC and Class I, Division 1, Groups A, B, C and D
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of KLD2-PL-Ex1.PA
| Supply | ||
|---|---|---|
| Connection | Power Rail or terminals 59+, 60-, 58 FE | |
| Rated voltage | 20 ... 35 V DC | |
| Ripple | ≤ 10 % | |
| Rated current | 430 mA ... 190 mA | |
| Fieldbus connection | ||
| PROFIBUS PA | ||
| Connection | terminals 3, 18+; 2, 17-; 1, 16 shield | |
| Rated voltage | 12.8 ... 13.4 V | |
| Rated current | max. 100 mA | |
| Protocol | PROFIBUS DP V1 | |
| Terminating impedance | 100 Ω , integrated | |
| Connection to gateway | ||
| Connection | Power Rail or terminals 40+, 41-, 42S to CH1 ... CH4 of the KLD2-GT-DP(R).*PA | |
| Baud rate | 31.25 kBit/s | |
| Error message output | ||
| Galvanic isolation | ||
| Connection to gateway/PROFIBUS PA | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V | |
| Connection to gateway/supply | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff | |
| PROFIBUS PA/Supply | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Standard conformity | ||
| Galvanic isolation | EN 50178, EN 50020 | |
| Electromagnetic compatibility | NE 21 | |
| Degree of protection | IEC 60529 | |
| Fieldbus standard | IEC 61158-2, ISA S 50.02 part 2 | |
| Climatic conditions | IEC 60721 | |
| Ambient conditions | ||
| Classification | 3K3 | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | < 75 % | |
| Pollution degree | max. 2, according to IEC 60664 | |
| Mechanical specifications | ||
| Connection type | Terminals | |
| Core cross-section | up to 2.5 mm2 | |
| Housing | 100 mm x 115 mm x 107 mm | |
| Degree of protection | IP20 | |
| Mass | 650 g | |
| Mounting | DIN rail mounting | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | PTB 99 ATEX 2142 , for additional certificates see www.pepperl-fuchs.com | |
| Group, category, type of protection, temperature class |  II (1) G [Ex ia] IIC Ga II (1) D [Ex ia] IIIC Da |
|
| Supply | ||
| Maximum safe voltage | 253 V AC / 125 V DC (Attention! Um is no rated voltage.) | |
| PROFIBUS PA | ||
| Voltage | 15 V | |
| Current | 207.2 mA | |
| Power | 1.93 W | |
| Maximum safe voltage | 60 V | |
| Connection to gateway | connection to the data interface CH1 ... CH4 of KLD2-GT-DP(R).*PA (conf. TÜV 02 ATEX 1819 X) | |
| Maximum safe voltage | 60 V (Attention! The rated voltage can be lower.) | |
| Statement of conformity | PF 15 CERT 3527 X | |
| Group, category, type of protection, temperature class | II 3G Ex ec IIC T4 Gc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242610 |
| ECLASS 12.0 | 27242610 |
| ECLASS 11.0 | 27242610 |
| ECLASS 10.0.1 | 27242610 |
| ECLASS 9.0 | 27242610 |
| ECLASS 8.0 | 27242610 |
| ECLASS 5.1 | 27242601 |
| ETIM 9.0 | EC001601 |
| ETIM 8.0 | EC001601 |
| ETIM 7.0 | EC001601 |
| ETIM 6.0 | EC001601 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Details: KLD2-PL-Ex1.PA
Datasheet: KLD2-PL-Ex1.PA
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet KLD2-PL-Ex1.PA | 498 KB | |
| Datenblatt KLD2-PL-Ex1.PA | 456 KB |
Documents: KLD2-PL-Ex1.PA
Approvals+Certificates: KLD2-PL-Ex1.PA
| Certificates | File Type | File Size |
|---|---|---|
| Europe PTB ATEX Category (1) G | 1775 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 G | 244 KB | |
| Control Drawings | ||
| Control drawing CSA / Control drawing CSA | 96 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 1046 KB |
Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …
RSS Info Service for PANOS Updates
Stay informed when a new software update of PANOS, the operating system for Ethernet-APL switches, is released: With our RSS Feed you will get an email notfication in your inbox immediately after an update has been released.
From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.