Optical reading head PCV80I-F200-R4-V19

RS 485 interface
Non-contact positioning on Data Matrix code tape
Travel ranges up to 10 km, in X and Y direction
Mechanically rugged: no wearing parts, long operating life, maintenance-free
High resolution and precise positioning, especially for facilities with curves and switch points as well as inclines and declines.
Infrared light

Datasheet
Documents
CAD+CAE
Approvals+Certificates
Software
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of PCV80I-F200-R4-V19

Product Description
Read head for incident light positioning system

General specifications
Passage speed		≤ 12.5 m/s
Measuring range		max. 10000 m
Light type		Integrated LED lightning , infrared
Read distance		80 mm
Reading field		40 mm x 25 mm
Resolution		± 0.1 mm
Functional safety related parameters
MTTF_d		96 a
Mission Time (T_M)		48 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
LED indicator		7 LEDs (communication, alignment aid, status information)
Electrical specifications
Operating voltage		15 ... 30 V DC , PELV
No-load supply current		max. 200 mA
Power consumption		3 W
Interface
Interface type		RS 485 interface
Data output code		binary code
Transfer rate		38400 ... 230400 Bit/s
Termination		Switchable terminal resistor
Input
Input type		1 to 3 functional inputs , programmable
Output
Output type		1 to 3 switch outputs , PNP , programmable , short-circuit protected
Switching voltage		Operating voltage
Switching current		150 mA each output
Standard conformity
Emitted interference		EN 61000-6-4:2007+A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		EN 60068-2-27:2009
Vibration resistance		EN 60068-2-6:2008
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature		0 ... 60 °C (32 ... 140 °F) , -20 ... 60 °C (-4 ... 140 °F) (noncondensing; prevent icing on the lens!)
Storage temperature		-20 ... 85 °C (-4 ... 185 °F)
Relative humidity		90 % , noncondensing
Mechanical specifications
Connection type		8-pin, M12 x 1 connector
Housing width		70 mm
Housing height		70 mm
Degree of protection		IP67
Material
	Housing	PC/ABS
Mass		approx. 160 g

Classifications

System	Classcode
ECLASS 11.0	27270701
ECLASS 10.0.1	27270701
ECLASS 9.0	27270701
ECLASS 8.0	27270701
ECLASS 5.1	27270701
ETIM 8.0	EC002999
ETIM 7.0	EC002999
ETIM 6.0	EC002999
ETIM 5.0	EC001852

Documents: PCV80I-F200-R4-V19

Manuals	Language	File Type	File Size
Manual PCV...-F200-R4-V19	ENG	PDF	10576 KB
Manual PCV...F200-B25-V1D	ENG	PDF	7489 KB
Handbuch PCV...-F200-R4-V19	GER	PDF	10585 KB
Handbuch PCV...F200-B25-V1D	GER	PDF	7507 KB
Instruction leaflets
Instruction leaflet / Beipackzettel	ALL	PDF	459 KB
Short instructions, safety information
Quick Start Guide PCV-USB-RS485-Converter Set	ENG	PDF	2804 KB
Kurzanleitung USB-RS485-Schnittstellenconverter	GER	PDF	2663 KB
Product information
Data Matrix Positioning System PCV - 2-D Code band and the latest camera technology ensure reliable position detection	ENG	PDF	348 KB
Data Matrix Positioniersystem PCV - Zuverlässige Positionserfassung Durch 2-D-Codeband und moderne Kamera-Technologie	GER	PDF	346 KB

CAD+CAE: PCV80I-F200-R4-V19

CAD	File Type	File Size
3-D model in IGS format / 3-D-Modell im IGS-Format	IGS	6255 KB
3-D model in STP format / 3-D-Modell im STP-Format	STP	2086 KB
CAD Portal / CAD Portal	LINK	---
EPLAN
EPLAN Data Portal / EPLAN Data Portal	LINK	---
EPLAN macro P+F.PCV80I-F200-R4-V19 / EPLAN-Makro P+F.PCV80I-F200-R4-V19	EDZ	105 KB

Approvals+Certificates: PCV80I-F200-R4-V19

Statements of compliance	Certificate No.	File Type	File Size
EU-Declaration of Conformity / EU-Konformitätserklärung	DOC-0017J	PDF	101 KB

Software: PCV80I-F200-R4-V19

Software Tools	Release Info	File Type	File Size
Software Vision Configurator / Software Vision Configurator	V6.0.00.5183	ZIP	28628 KB

Associated Products: PCV80I-F200-R4-V19

Matching System Components

	PCV-CR20 Repair tape
	Coded repair tape for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000050M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000006M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000010M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000020M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000100M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CA10- / PCV-CA20- Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CR40 Repair tape
	Coded repair tape for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

Accessories

	V19-G-ABG-PG9 Female cordset, field attachable
	Female connector, M12, 8-pin, shielded, field attachablefa

	PCV-CM20-002-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-001-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-USB-RS485-Converter Set Interface converter
	USB to RS 485 interface converter, Extension cable 0.8 m in scope of delivery, Power supply for 95 - 230 V AC, For RS485fa

	PCV-KBL-V19-STR-RS485 Cable unit
	Cable unit with power supply for USB / RS-485 interface converter , Power supply for 95 - 230 V ACfa

	V19-G-ABG-PG9-FE Field attachable female cordset with earth clamp
	Female connector, M12, 8-pin, shielded, field attachablefa

	PCV-SC12 Grounding clip
	Grounding clip for PCV system, Stainless steel version, Low weight, M12 plug connection, High mechanical stabilityfa

	PCV-LM25 Marker head
	Marker head for 25 mm code tape, For 25 mm code tapes, Can be used for PCV80..., PCV100..., and PCV130... readers, Includes 2 x edding® 3000 permanent markersfa

	PCV-MB1 Mounting bracket
	Mounting bracket for PCV* read headfa

	PCV-AG80 Alignment guide
	Alignment guide for PCV80-* read headfa

	Vision Configurator Software
	Operating software for camera-based sensorsfa

	PCV-CM20-022-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-021-006-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-030-004-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-041-007-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20---SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-001-135-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-021-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-001-240-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-001-050-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-004-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

Functional Safety Hub from Pepperl+Fuchs

Visit the Functional Safety Hub

Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.

SIL 3/PL e with One Sensor

For the first time, the new absolute positioning systems safePXV and safePGV realize safety level SIL 3/PL e with a single sensor …

Quick help needed?

Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
phone +49 621 776-0

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.