Optical reading head PCV100-F200-B6-V15B-6011

Non-contact positioning on Data Matrix code tape
Mechanically rugged: no wearing parts, long operating life, maintenance-free
High resolution and precise positioning, especially for facilities with curves and switch points as well as inclines and declines.
Travel ranges up to 10 km, in X and Y direction
PROFIBUS interface

Datasheet
Documents
CAD+CAE
Approvals+Certificates
Software
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of PCV100-F200-B6-V15B-6011

Product Description
Read head for incident light positioning system

General specifications
Passage speed		≤ 6 m/s
Measuring range		max. 10000 m
Light type		Integrated LED lightning (red)
Read distance		100 mm
Reading field		60 mm x 35 mm
Resolution		± 0.1 mm
Functional safety related parameters
MTTF_d		20 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
LED indicator		7 LEDs (communication, alignment aid, status information)
Electrical specifications
Operating voltage		15 ... 30 V DC , PELV
No-load supply current		max. 400 mA
Power consumption		6 W
Interface
Interface type		PROFIBUS DP V0
Protocol		PROFIBUS DP acc. to EN 50170
Transfer rate		9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing
Interface 2
Interface type		USB Service
Input
Input type		1 funtion input 0-level: -U_Bor unwired 1-level: +8 V ... +U_B , programmable
Input impedance		≥ 27 kΩ
Output
Output type		1 to 3 switch outputs , PNP , programmable , short-circuit protected
Switching voltage		Operating voltage
Switching current		150 mA each output
Standard conformity
Emitted interference		EN 61000-6-4:2007+A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		EN 60068-2-27:2009
Vibration resistance		EN 60068-2-6:2008
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature		0 ... 60 °C (32 ... 140 °F) , -20 ... 60 °C (-4 ... 140 °F) (noncondensing; prevent icing on the lens!)
Storage temperature		-20 ... 85 °C (-4 ... 185 °F)
Relative humidity		90 % , noncondensing
Mechanical specifications
Connection type		8-pin, M12x1 connector, standard (supply+IO) 5-pin, M12x1 socket, B-coded (Bus Out) 5-pin, M12x1 connector, B-coded (Bus In)
Housing width		70 mm
Housing height		70 mm
Degree of protection		IP67
Material
	Housing	PC/ABS
Mass		approx. 200 g

Classifications

System	Classcode
ECLASS 11.0	27270701
ECLASS 10.0.1	27270701
ECLASS 9.0	27270701
ECLASS 8.0	27270701
ECLASS 5.1	27270701
ETIM 8.0	EC002999
ETIM 7.0	EC002999
ETIM 6.0	EC002999
ETIM 5.0	EC001852

Documents: PCV100-F200-B6-V15B-6011

Manuals	Language	File Type	File Size
Manual Code Cards to configure the fieldbus address	ENG	PDF	5321 KB
Manual PCV...-F200-B6-V15B	ENG	PDF	2676 KB
Handbuch Codekarten zur Konfiguration der Feldbusadresse	GER	PDF	5326 KB
Handbuch PCV...-F200-B6-V15B	GER	PDF	2682 KB
Instruction leaflets
Instruction leaflet / Beipackzettel	ALL	PDF	1211 KB
Product information
Data Matrix Positioning System PCV - 2-D Code band and the latest camera technology ensure reliable position detection	ENG	PDF	348 KB
Data Matrix Positioniersystem PCV - Zuverlässige Positionserfassung Durch 2-D-Codeband und moderne Kamera-Technologie	GER	PDF	346 KB

CAD+CAE: PCV100-F200-B6-V15B-6011

CAD	File Type	File Size
3-D model / 3-D-Modell	STP	4232 KB
CAD Portal / CAD Portal	LINK	---
EPLAN
EPLAN Data Portal / EPLAN Data Portal	LINK	---
EPLAN macro P+F.PCV100-F200-B6-V15B-6011 / EPLAN-Makro P+F.PCV100-F200-B6-V15B-6011	EDZ	314 KB

Approvals+Certificates: PCV100-F200-B6-V15B-6011

Statements of compliance	Certificate No.	File Type	File Size
EU-Declaration of Conformity / EU-Konformitätserklärung	DOC-0017J	PDF	101 KB

Software: PCV100-F200-B6-V15B-6011

Drivers	Release Info	File Type	File Size
GSD file for PCV...-F200-B6-V15B / GSD-Datei für PCV...-F200-B6-V15B	02/2013	ZIP	3 KB
Software Tools
Software Vision Configurator / Software Vision Configurator	V6.0.00.5576	ZIP	59320 KB

Associated Products: PCV100-F200-B6-V15B-6011

Matching System Components

	PCV-CR20 Repair tape
	Coded repair tape for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000100M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000006M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000010M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000020M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV000050M-CA20-000000 Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CA10- / PCV-CA20- Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CR40 Repair tape
	Coded repair tape for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20---SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

Accessories

	PCV-AG100 Alignment guide
	Alignment guide for PCV100-* read headfa

	V19-G-5M-PUR-ABG Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa

	PCV-CM20-001-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-002-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	ICZ-TR-V15B Terminal resistor
	Terminal resistor for PROFIBUSfa

	V15B-G-2M-PUR-ABG-V15B-G Connection cable, shielded
	PROFIBUS bus cable M12 socket straight to M12 plug straight B-coded, 5-pin, PUR cable 2-core violet, shieldedfa

	V15B-G-5M-PUR-ABG-V15B-G Connection cable, shielded
	PROFIBUS bus cable M12 socket straight to M12 plug straight B-coded, 5-pin, PUR cable 2-core violet, shieldedfa

	PCV-SC12 Grounding clip
	Grounding clip for PCV system, Stainless steel version, Low weight, M12 plug connection, High mechanical stabilityfa

	PCV-LM25 Marker head
	Marker head for 25 mm code tape, For 25 mm code tapes, Can be used for PCV80..., PCV100..., and PCV130... readers, Includes 2 x edding® 3000 permanent markersfa

	PCV-MB1 Mounting bracket
	Mounting bracket for PCV* read headfa

	PCV-SC12A Grounding clip
	Grounding clip for PCV system, Stainless steel version, Low weight, M12 plug connection, High mechanical stabilityfa

	V19-G-2M-PUR-ABG Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa

	Vision Configurator Software
	Operating software for camera-based sensorsfa

	PCV-KBL-V19-STR-USB Cable unit
	USB cable unit with power supply, Power supply for 95 - 230 V AC, For SSI interface, For PROFIBUS DP, For CANopen, For PROFINET, For EtherNet/IPfa

	PCV-CM20-022-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-021-006-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-030-004-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-041-007-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-021-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-004-001-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-001-050-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-001-240-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PCV-CM20-001-135-SET Code tape marker
	Event Marker for PCV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	VAZ-V1S-B Blind plug
	Blind plug for M12 socketsfa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

Functional Safety Hub from Pepperl+Fuchs

Visit the Functional Safety Hub

Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.

SIL 3/PL e with One Sensor

For the first time, the new absolute positioning systems safePXV and safePGV realize safety level SIL 3/PL e with a single sensor …

Quick help needed?

Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
phone +49 621 776-0

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.