Serviceline Industrial Sensors
Serviceline Explosion Protection
Inductive positioning system PMI40-F90-IU2EP-IO-V15
- Parameterization and diagnosis via IO-Link
- Measuring range 0 ... 40 mm
- Parameterisable measuring range
- Analog current or voltage output, programmable
- 2 Push-pull outputs
- Switch points programmable via IO-Link
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of PMI40-F90-IU2EP-IO-V15
| General specifications | ||
|---|---|---|
| Switching element function | Analog current or voltage output, programmable 2 switch outputs, programmable |
|
| Object distance | 0.5 ... 3 mm , recommended: 1.5 mm | |
| Measurement range | 0 ... 40 mm | |
| Linearity range | 1 ... 39 mm | |
| Nominal ratings | ||
| Operating voltage | 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized) |
|
| Reverse polarity protection | reverse polarity protected | |
| Linearity error | within measuring range: ± 0.8 mm within linearity range: ± 0.4 mm |
|
| Repeat accuracy | ± 0.1 mm | |
| Resolution | 50 µm | |
| Temperature drift | ± 0.5 mm (-25 °C ... 70 °C) | |
| No-load supply current | ≤ 40 mA | |
| Operating voltage indicator | LED green | |
| Functional safety related parameters | ||
| MTTFd | 365 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| LED S1 | switching state Switching output 1 | |
| LED S2 | switching state Switching output 2 | |
| LED S3 | Damping element in the configured analog measuring range | |
| LED STATUS | Status display LED, green/red (Power on, communication/error, missing damping element) | |
| Interface | ||
| Interface type | IO-Link (via C/Q = Pin 4) | |
| Device profile | Smart Sensor | |
| Device ID | 0x200203 (2097667) | |
| Transfer rate | COM 2 (38.4 kBaud) | |
| Value range | 0000h ... 3200h | |
| Min. cycle time | 2.3 ms | |
| Process data width | Process data input: 16 Bit Process data output: none |
|
| SIO mode support | yes | |
| Compatible master port type | A | |
| Switching output | ||
| Output type | 2 push-pull outputs (can be parameterized), short-circuit-proof, reverse polarity protection, surge-proof | |
| Operating current | ≤ 100 mA / output | |
| Switching window | ± 1 mm | |
| Switching hysteresis | 0.2 mm | |
| Voltage drop | ≤ 3 V | |
| Short-circuit protection | pulsing | |
| Analog output | ||
| Output type | 1 current output: 4 ... 20 mA or 1 voltage output: 0 ... 10 V , programmable | |
| Load resistor | current output: ≤ 400 Ω voltage output: ≥ 1000 Ω |
|
| Short-circuit protection | voltage output: current limit | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 EN 60947-5-7:2003 EN61131-9:2013 IEC 60947-5-7:2003 IEC 61131-9:2013 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| Marine approval | DNVGL TAA00001V2 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | 5-pin, M12 x 1 connector | |
| Degree of protection | IP67 / IP69K | |
| Material | ||
| Housing | PBT, stainless steel 1.4571 , brass, nickel-plated | |
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) | |
| Mass | 56 g | |
Documents: PMI40-F90-IU2EP-IO-V15
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual PMIxxx-F90-...-IO-... Inductive Positioning Measurement System with IO-Link | ENG | 2695 KB | |
| Handbuch PMIxxx-F90-...-IO-... Induktives Positionsmesssystem mit IO-Link | GER | 3537 KB | |
| Technical information | |||
| Installation and Design Notes for Position Sensors, F90 Series | ENG | 311 KB | |
| Installation and user instructions for offline parameterization of IO-Link sensors | ENG | 1788 KB | |
| Installations-/Benutzeranweisungen für die Offline-Parametrierung von IO-Link-Sensoren | GER | 1764 KB | |
| Montage- und Konstruktionshinweise für Positionssensoren, Serie F90 | GER | 320 KB | |
CAD+CAE: PMI40-F90-IU2EP-IO-V15
| CAD | File Type | File Size | |
|---|---|---|---|
| CAD Portal / CAD Portal | LINK | --- | |
| CAD-files 3-D in IGS format / CAD-Dateien 3-D im IGS-Format | IGS | 1468 KB | |
| CAD-files 3-D in STP format / CAD-Dateien 3-D im STP-Format | STP | 402 KB |
Approvals+Certificates: PMI40-F90-IU2EP-IO-V15
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-3681A | 381 KB | |
| Certificates | |||
| - DNV GL Marine | TAA00001V2 | 172 KB | |
| /cert/cert4289c.pdf | 20190717-E87056 | 280 KB | |
| IO-Link Manufacturer Declaration | CERT-4518 | 244 KB | |
Software: PMI40-F90-IU2EP-IO-V15
| IO Device Description (IODD) | Release Info | File Type | File Size |
|---|---|---|---|
| IODD for PMIxx-F90-IU2EP-IO series / IODD für PMIxx-F90-IU2EP-IO Serie | V1.01.000 / 2018-03-20 | ZIP | 715 KB |
| Software Tools | |||
| IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool | V1.00.004 / 2020-06-01 | ZIP | 63827 KB |
Associated Products: PMI40-F90-IU2EP-IO-V15
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2021 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.