Serviceline Industrial Sensors
Serviceline Explosion Protection

Safety edge PSE4-SL-01

PSE4-SL-01
  • Safety thru-beam sensor
  • Evaluation via safety control unit PSE4-SC-01
  • Modulated infrared light
  • For mounting in sensor strip PSE4-RUB and -ROI
  • No additional mounting materials required
  • Component of PSE4 modular system

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  PSE4-SL-01

Product Description
Safety photoelectric sensor for the PSE4 series
General specifications
Effective detection range0.4 ... 10 m
Light sourceLED
Light typemodulated infrared light
Functional safety related parameters
Performance level (PL)PL e
CategoryCat. 4
Mission Time (TM)20 a
Electrical specifications
Operating voltagePower supply via control unit
Compliance with standards and directives
Standard conformity
SafetyEN ISO 13856-2:2013
Mechanical specifications
Degree of protectionIP68
Connectionfixed cable
Emitter: 10 m
Receiver: 2.9 m
Material
CablePUR

Documents: PSE4-SL-01

Instruction manualsLanguageFile TypeFile Size
Operating instructions PSE4 safety edge / Betriebsanleitung Sicherheitsschaltleiste PSE4ALLPDF345 KB

Approvals+Certificates: PSE4-SL-01

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0216APDF138 KB
Certificates
EU TUV Rheinland01/205/5100.01/14PDF817 KB
US ULE344450LINK---

Software: PSE4-SL-01

Software ToolsRelease InfoFile TypeFile Size
Software tools / Software ToolsZIP131 KB

Function: PSE4-SL-01

In its entirety, the PSE4 safety edge system consists of the control interface, sensors, a rubber sensor strip, and an optional aluminum mounting strip. The system can be used within a temperature range of 5 °C to 55 °C.

The control interface analyzes the signal from the sensors and is designed to be installed in a switch cabinet. The safety contact of the control interface is released by actuating the safety edge. The system as a whole can be used in applications up to Cat. 4/PL e as defined in EN ISO 13849-1.

Functional Safety Hub from Pepperl+Fuchs

Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.