Serviceline Industrial Sensors
Serviceline Explosion Protection

Bullet WirelessHART Adapter WHA-BLT-F9D0-N-A0-Z0-Ex1

WHA-BLT-F9D0-N-A0-Z0-Ex1
  • Installation in Zone 0, 20
  • Installation in Class I, II, Division 1
  • Installation in Class III
  • Installation in Class I, Division 2
  • Ex i circuits for Ex i field devices
  • Cast aluminum housing
  • Loop powered
  • Direct mounting on HART or 4 mA ... 20 mA field device
  • Encapsulated antenna
  • Up to 8 field devices in multidrop

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  WHA-BLT-F9D0-N-A0-Z0-Ex1

Supply
Rated voltage7 ... 30 V DC
Rated current< 1 mA , max. 25 mA
Electrical specifications
Output current3.2 ... 25 mA
Supplyloop power for field devices
voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V
Input
Connection- 5 wires, 600 mm long, exiting from male thread NPT1/2
- 1 external grounding point
HART communication
ProtocolHART 7.1, backward compatible
Number of devicesup to 8 HART field devices (depending on installation)
Output
Interfaceinternal antenna
CommunicationWirelessHART specifications
- physical layer: IEEE 802.15.4.2006
- frequency band: 2.4 GHz (ISM band, licence free)
- maximum transmit power: +10 dBm
- outdoor transmission range: 235 m
- communication standard: WirelessHART acc. to IEC 62591
Directive conformity
Radio and telecommunication terminal equipmentThe usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.
Directive 2014/53/EUEN 300 328 V2.1.1:2016
EN 301 489-1 V2.2.0:2017
EN 301 489-17 V3.2.0:2017
FCC CFR47 Part 15 B and CANSI C63.4-2003 , FCC ID: X89-WA1101
Conformity
Degree of protectionIEC 60529:2013
Ambient conditions
Ambient temperaturetemperature class T5: -40 ... 85 °C (-40 ... 185 °F)
temperature class T6: -40 ... 75 °C (-40 ... 167 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humiditymax. 100 %
Mechanical specifications
Degree of protectionIP67
Materialaluminum alloy with polyurethane enamel paint
Mass460 g
Dimensions60.8 x 60.8 x 100 mm (l x w x h)
Height100 mm
Diameter60.8 mm
Data for application in connection with hazardous areas
EU-type examination certificateFM 17 ATEX 0046 X
MarkingEx-Hexagon II 1G Ex ia IIC T6...T5 Ga
Ex-Hexagon II 1D Ex ia IIIC T95°C Da
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-11:2012
International approvals
FM approvalFM 17 NUS 0010
FM 17 US 0191 X
Control drawing116-0425 (cFMus)
Approved forIS Class I, II, III, Division 1, Groups A-G
Class I, Zone 0, AEx ia IIC T6...T5 Ga
Zone 20, AEx ia IIIC T95°C Da
CSA approvalFM 17 NCA 0004
FM 17 CA 0102 X
Control drawing116-0425 (cFMus)
Approved forIS Class I, II, III, Division 1, Groups A-G
Ex ia IIC T6...T5 Ga
Ex ia IIIC T95°C Da
associated apparatus [Ex ia]
IECEx approval
IECEx certificateIECEx FMG 17.0020X
IECEx markingEx ia IIC T6...T5 Ga , Ex ia IIIC T95°C Da
StandardsIEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-11:2011 , IEC 60079-31:2013
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027219090
ECLASS 12.027219090
ECLASS 11.027219290
ECLASS 10.0.127219290
ECLASS 9.027219290
ECLASS 8.027219290
ECLASS 5.127242692
ETIM 9.0EC002584
ETIM 8.0EC002584
ETIM 7.0EC002584
ETIM 6.0EC002584
ETIM 5.0EC002584
UNSPSC 12.139121008

Details: WHA-BLT-F9D0-N-A0-Z0-Ex1

Function

The device upgrades a conventional HART or 4 ... 20 mA field device with a WirelessHART interface.

The supply is ensured via loop power. Due to its intrinsically safe circuits, the adapter can be mounted on an intrinsically safe field device or anywhere in the 4 ... 20 mA loop. Up to 8 HART field devices can be connected to each other in multidrop mode. The encapsulated antenna allows for use in harsh environments.

The device can be programmed with a configuration tool easily (DTM or DD).

Informative Literature: WHA-BLT-F9D0-N-A0-Z0-Ex1

Language Selection:
LiteratureLanguageFile TypeFile Size
Application Report - Outdoor Monitoring of Gas Limit ValuesENGPDF158 KB
Application Report - WirelessHART Adapter Bullet Enables More Flexibility for Mobile Mixing TanksENGPDF129 KB
Application Report - WirelessHART Connects Mobile Measurement StationsENGPDF149 KB
Application Report - Wirelessly Networked Tank FarmsENGPDF736 KB

Product Documentation: WHA-BLT-F9D0-N-A0-Z0-Ex1

Language Selection:
System DescriptionsLanguageFile TypeFile Size
Patent InformationENGPDF365 KB
Safety and Security Documentation
Instruction manualENGPDF201 KB
Manuals
ManualENGPDF2085 KB

Approvals: WHA-BLT-F9D0-N-A0-Z0-Ex1

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Europe FM ATEX ia 1G ATEX ia 1DFM 17 ATEX 0046XALLPDF301 KB
Korea KOSHA21-AV4BO-00225XALLPDF442 KB
Control Drawings
Control drawing CSA / Control drawing CSA   ALLPDF187 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3836DALLPDF78 KB

Software: WHA-BLT-F9D0-N-A0-Z0-Ex1

Language Selection:
Device Description Files/DriversRelease InfoFile TypeFile Size
DTM WirelessHART Adapter WHA-BLT* "Bullet" / DTM WirelessHART Adapter WHA-BLT* "Bullet"ZIP16481 KB
FHX-File WirelessHART Adapter WHA-BLT* "Bullet" / FHX-Datei WirelessHART Adapter WHA-BLT* "Bullet"ZIP1115 KB
DD WirelessHART Adapter WHA-BLT* "Bullet" / DD WirelessHART Adapter WHA-BLT* "Bullet"ZIP3513 KB

Associated Products: WHA-BLT-F9D0-N-A0-Z0-Ex1

Accessories
Device DTMpa
Adapter male thread metric to female thread metric, Adapter male thread metric to female thread NPT, Metric and NPT versions available, Brass nickel-plated or stainless steel, Ex db, Ex eb and Ex tb certified, Suitable for operation in Zone 1, Zone 2, Zone 21 and Zone 22pa