Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Download the complete datasheet as a PDF:
|Print mark contrast sensor, 9.5 mm detection range, RGB light, light/dark on, external Teach-in, analog output, push-pull output, M12 plug|
|Sensor range||9.5 mm ± 3 mm|
|Light type||Visible green/red/blue, modulated light|
|Light spot representation||1 mm x 4 mm|
|Functional safety related parameters|
|Mission Time (TM)||20 a|
|Diagnostic Coverage (DC)||0 %|
|Function indicator||LED yellow; switching operation: lights up if print mark is detected
Teach-In operation: flashing slowly
alarm display: flashing quickly, if no safe operation is possible
|Control elements||Teach-In key|
|Operating voltage||10 ... 30 V DC|
|Switching type||light/dark on switchable, results from the order of the Teach-In|
|Signal output||Push-pull output, short-circuit protected, reverse polarity protected|
|Compliance with standards and directives|
|Product standard||EN 60947-5-2:2007
|Shock and impact resistance||IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions|
|Vibration resistance||IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions|
|Degree of protection||IP67|
|Connection||5-pin, M12 x 1 connector|
|Housing||PC (glass-fiber-reinforced Makrolon)|
|Instruction leaflets||Language||File Type||File Size|
|Instruction leaflet / Beipackzettel||ALL||465 KB|
|CAD||File Type||File Size|
|3-D model in IGS format / 3-D-Modell im IGS-Format||IGS||217 KB|
|3-D model in STP format / 3-D-Modell im STP-Format||STP||154 KB|
|CAD Portal / CAD Portal||LINK||---|
|Statements of compliance||Certificate No.||File Type||File Size|
|EU-Declaration of conformity / EU-Konformitätserklärung||DOC-2232A||185 KB|
|US CA UL General Purpose||E87056||LINK||---|
The contrast sensor series DK10, DK2X, DKE2X and DK3X have an extreme robust and IP67 tight industrial standard housing with eight M5 metal reinforced inserts for sensor mounting. The lenses are made of high grade glass. All sensors offer different light spot shapes and orientations and have powerful push-pull outputs (NPN/PNP/push-pull).
The DK10 sensor series offers laser and LED light sources, a manual sensitivity adjustment and high sensing ranges up to 800 mm.
The DK20/DK21/DKE2X standard contrast sensor series offers a very good contrast recognition and are available in extreme robust stainless-steel housings (DKE).
The DK31/DK34/DK35 sensor series is designed for cutting edge contrast recognition at highest sensitivity level.
The series DK20/DK34 offer a static Teach-In, the DK21/DKE21/DK31/DK35 series offer a dynamic Teach-In.