Print mark contrast sensor DK12-11-IO/A/92/136
- IO-link interface for service and process data
- Diffuse mode sensor for recording any print mark
- TEACH-IN, static and dynamic
- 40 µs response time, suitable for extremely rapid scanning processes
- 3 emitter colors: green, red and blue
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of DK12-11-IO/A/92/136
| Product Description | ||
|---|---|---|
| Print mark contrast sensor with IO-Link interface, 11 mm detection range, RGB light perpendicular to the longitudinal direction of the housing, light/dark on, 2 push-pull outputs, M12 plug | ||
| General specifications | ||
|---|---|---|
| Sensor range | 11 mm ± 2 mm | |
| Light source | 3 LEDs (R,G,B) | |
| Light type | Visible green/red/blue, modulated light | |
| Light spot representation | 3 mm x 1 mm , light spot perpendicular to housing | |
| Angle deviation | max. ± 3° | |
| Teach-In | static and dynamic Teach-In | |
| Indicators/operating means | ||
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) , IO link communication: green LED goes out briefly (1 Hz) | |
| Function indicator | 2 LEDs yellow, light up in case of detection | |
| Teach-In indicator | Teach-In mark: LED green/yellow equiphase flashing; 2,5 Hz . Teach-In background: LED green/yellow non equiphase flashing; 2,5 Hz . Teach-In dynamic: LED green/yellow equiphase flashing; 1.0 Hz . Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz . | |
| Control elements | Teach-In rotary switch for Switching operation, Teach-In mark, Teach-In background and dynamic Teach-In | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC / when operating in IO-Link mode: 18 ... 30 V | |
| Ripple | 10 % | |
| No-load supply current | ≤ 60 mA at 24 V supply voltage | |
| Interface | ||
| Interface type | IO-Link | |
| Protocol | IO-Link V1.0 | |
| Mode | COM 2 (38.4 kBaud) | |
| Output | ||
| Switching type | light/dark on | |
| Signal output | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Switching frequency | 12.5 kHz | |
| Response time | 40 µs | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| Protection class | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| UL approval | cULus Listed , Class 2 power source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) | |
| Mechanical specifications | ||
| Housing width | 41.5 mm | |
| Housing height | 49 mm | |
| Housing depth | 15 mm | |
| Degree of protection | IP67 | |
| Connection | 4-pin, M12 metal connector , can be rotated 90° | |
| Material | ||
| Housing | Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC |
|
| Optical face | Plastic pane | |
| Mass | 60 g | |
Documents: DK12-11-IO/A/92/136
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual DK12-11-IO | ENG | 1574 KB | |
| Handbuch DK12-11-IO | GER | 1622 KB | |
| Instruction leaflets | |||
| Instruction leaflet / Beipackzettel | ALL | 443 KB | |
| Product information | |||
| Product information - Sensors and Systems with IO-Link (USA) | USA | 3959 KB | |
CAD+CAE: DK12-11-IO/A/92/136
| CAD | File Type | File Size | |
|---|---|---|---|
| 3-D model in IGS format / 3-D-Modell im IGS-Format | IGS | 276 KB | |
| 3-D model in STP format / 3-D-Modell im STP-Format | STP | 200 KB | |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: DK12-11-IO/A/92/136
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| EU-Declaration of Conformity / EU-Konformitätserklärung | DOC-1797B | 184 KB | |
| Certificates | |||
| US CA UL General Purpose | E87056 | LINK | --- |
Associated Products: DK12-11-IO/A/92/136
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Function: DK12-11-IO/A/92/136
The contrast sensor DK12 with an IO-Link interface makes continuous communication with the diagnosis system and the parameter assignment up to the sensor level available for the first time. That way it is ensured that the intelligence which is already integrated in each DK12-contrast sensor, is harnessed to the full. This will offer a number of special advantages during service (remedial action, maintenance und device exchange), commissioning (cloning, identification, configuration and localization) or during operation (change of job, continuous parameter monitoring und online diagnosis).
Pepperl+Fuchs AG
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,200 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.