Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Battery W-BAT-B2-Li

W-BAT-B2-Li
  • Accessory for WHA-*-F8B2-*
  • Lithium thionyl chloride battery
  • Voltage 7.2 V
  • Capacity 19 Ah

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  W-BAT-B2-Li

Electrical specifications
Nominal voltage7.2 V
Nominal current250 mA
Nominal capacity19 Ah , capacity can varies with usage conditions
Ambient conditions
Ambient temperature-40 ... 80 °C (-40 ... 176 °F)
Storage temperature15 ... 30 °C (59 ... 86 °F) recommended
-40 ... 80 °C (-40 ... 176 °F) at accelerated derating
Mechanical specifications
Massapprox. 285 g
Dimensions75 x 71 x 39 mm (2.95 x 2.8 x 1.5 inch)

Documents: W-BAT-B2-Li

Instruction manualsLanguageFile TypeFile Size
Instruction manualENGPDF44 KB
BetriebsanleitungGERPDF47 KB
Product information
Safety data sheet lithium batteries W-BAT-B*-LiENGPDF65 KB
Fiche de données de sécurité W-BAT-B*-LiFRAPDF74 KB
Sicherheitsdatenblatt Lithiumbatterien W-BAT-B*-LiGERPDF66 KB

Associated Products: W-BAT-B2-Li

Accessory of
1-channel, WirelessHART Adapter, Battery operated, Also supplies field device, Input 2-wire HART transmitters and 2-wire HART current sources, Output WirelessHART wireless interface, Direct mounting on HART or 4 mA ... 20 mA field device, Rotatable antennapa
1-channel, Installation in Zone 1, WirelessHART Adapter, Battery operated, Also supplies field device, Input 2-wire HART transmitters and 2-wire HART current sources, Output WirelessHART wireless interface, Direct mounting on HART or 4 mA ... 20 mA field device, Rotatable antennapa
1-channel, Installation in Zone 1, Zone 21, and Class I Div. 1, WirelessHART Adapter, Battery operated, Also supplies field device, Input 2-wire HART transmitters and 2-wire HART current sources, Output WirelessHART wireless interface, Direct mounting on HART or 4 mA ... 20 mA field device, Rotatable antennapa
WirelessHART Adapter BULLET

The BULLET is the only WirelessHART adapter on the market in an Ex d housing. Simply connect the BULLET to your field device and enable efficient, wireless signal transmission.