Serviceline Industrial Sensors
Serviceline Explosion Protection

Not available for purchase

This product has been replaced.Go to replacement product
Not available for purchase
Not available for purchase

5500 series manifold 5500-MAN-EX01-120VAC

5500-MAN-EX01-120VAC
  • Suitable for Zone 2/22
  • ATEX & IECEX certifications
  • Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
  • Suitable for steel or plastic tubing
  • Mounting hardware, pneumatic fittings and tubing included

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  5500-MAN-EX01-120VAC

Product Description
5500 series manifold, ATEX/IECEx certified, 120 V AC
General specifications
Operating modeautomatic purging
Series5500
Hazardous environmentgas or dust
Supply
Rated power120 V AC: 7.2 VA, 60 Hz
Voltage tolerance: +/- 10 %
Electrical specifications
Fuse rating80 mA
(fuse rating on 5500 control unit)
Pneumatic parameters
Protective gas supplyinstrument grade air or inert gas
Pressure requirement1.7 bar (25 psi) to 8.0 bar (115 psi)
Purge flow ratesolenoid valves : Cv (flow coefficient) = 1.4
needle valve : Cv (flow coefficient) = 0.24
Ambient conditions
Ambient temperature-20 ... 50 °C (-4 ... 122 °F)
Mechanical specifications
Connection typePneumatic
Input port: 3/8 inch Tube compression fitting
Output port: 3/8" Tube compression fitting

Degree of protectiontype 7 & 9
Material
Housing: anodized aluminum
3/8" compression fittings: 316 stainless steel
Pressure ports: 3/8" NPTF
Bulkhead fitting: 316 stainless steel
Mounting bolts: 1/4 - 20, 316 stainless steel
Sealing washers: UL recognized type 4X
Mass1250 g (2.8 lb)
Dimensionssee dimensions
Data for application in connection with hazardous areas
EU-type examination certificate
MarkingEx-Hexagon II 2 G Ex mb IIC T5 Gb
Ex-Hexagon II 2 D Ex mb tb IIIC T95C Db IP65
Protection by encapsulation

PTB 03 ATEX 2018 X
Certificate
Temperature classT3C
International approvals
IECEx approvalEx-Hexagon II 2 G Ex mb IIC T5 Gb
Ex-Hexagon II 2 D Ex mb tb IIIC T95C Db IP65
Protection by encapsulation
IECEx PTB 04.0002X

Classifications

SystemClasscode
ECLASS 13.027180591
ECLASS 12.027180591
ECLASS 11.027180591
ECLASS 10.0.127291390
ECLASS 9.027291390
ECLASS 8.027291390
ECLASS 5.140050501
ETIM 9.0EC000243
ETIM 8.0EC000243
ETIM 7.0EC000243
ETIM 6.0EC000243
ETIM 5.0EC000243
UNSPSC 12.139121303

Details: 5500-MAN-EX01-120VAC

Function

The 5500-MAN-EX01-* combines a solenoid valve for purging and a needle valve for pressurization in one manifold design. When the valve is energized, the solenoid valve is open and allows for a high flow rate of protective gas into the enclosure. When the valve is deenergized, the flow through the internal needle valve is adjustable by a flathead screw driver through the needle stem on the manifold. The solenoid valve is used for purging, leakage compensation, and temperature control by signals from user defined points on the 5500 control unit.

Mounting hardware includes 3/8" tube compression fittings mounted on the manifold for input and output flow, 3/8" tube compression bulkhead fitting for getting flow into the enclosure and certified sealing washers with bolts to mount the manifold to the enclosure. Also included is 1 meter of 3/8" poly tubing with 3/8" poly tube stiffener inserts which allows the connection of plastic tubing to compression fittings without collapsing the tubing.

The 5500-MAN-EX-01-* is certified for Zone applications. For NEC, Class/ Division applications see the model number key for proper manifold selection.

The 5500 valve system works with the 5500 control unit and EPV-5500 vents.

The 5500 system has ATEX and IECEx certification for Zone 2&22 installation.

Design / Simulation: 5500-MAN-EX01-120VAC

Language Selection:
CADLanguageFile TypeFile Size
DWG and STP files for the Purge 5500-MAN-EX01 / CAD 2-DALLZIP326 KB

Approvals: 5500-MAN-EX01-120VAC

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
ATEX CertificatePTB 03 ATEX 2018 XALLPDF4024 KB
IECEx Certificate of ConformityIECEx PTB 04.0002XALLLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-B0G7ALLPDF244 KB

Associated Products: 5500-MAN-EX01-120VAC

Accessory of
You must purchase an EPV-7500-* vent with this control unit.pa
You must purchase an EPV-7500-* vent with this control unit.pa
You must purchase an EPV-7500-* vent with this control unit.pa
You must purchase an EPV-7500-* vent with this control unit.pa

Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!

Our interactive app gives you a step-by-step programming simulation for your purge and pressurization system. Download the free-of-charge app for iOS or Android devices now …

Ex p Purge Units

Discover the all-new 5500 Series. These compact purging units enable fully automatic protection.