Serviceline Industrial Sensors
Serviceline Explosion Protection

Power Bus for DIN Mouning Rail POWERBUS-SETH5.250

POWERBUS-SETH5.250
  • Bus carrier with bus PCB for 35 mm DIN mounting rail, height 15 mm
  • Provides DC supply voltage and the bus connection to all equipped SC-System modules
  • Standard length 250 mm (9.84 inch), simple to customize to application space
  • Eliminates daisy-chains

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  POWERBUS-SETH5.250

Product Description
Power bus for 35 mm DIN mounting rail, height: 15 mm, length: 250 mm
Electrical specifications
Rated voltage24 V DC
Rated current3 A
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection5 conductors
Supply2 Conductors
Fault output1 Conductors
Dimensions13 x 25 x 250 mm (0.51 x 1.57 x 9.84 inch)
Mountingin 35 mm DIN mounting rail acc. to EN 60715:2001
Height: 15 mm
General information
Scope of delivery- power bus POWERBUS-SETH5.250
- end cap POWERBUS-CAP
Accessories
Optional accessories- cover POWERBUS-COV.250
- end cap POWERBUS-CAP
- 35 mm DIN mounting rail acc. to EN 60715

Documents: POWERBUS-SETH5.250

ManualsLanguageFile TypeFile Size
Manual Signal Conditioners SC-SystemENGPDF2152 KB
Handbuch Signaltrenner SC-SystemGERPDF2156 KB

Associated Products: POWERBUS-SETH5.250

Accessory of
1-channel signal conditioner, 24 V DC supply, Input 2-wire transmitters, Input current and voltage sources, Dual output 0/4 mA ... 20 mA, 0/1 V ... 5 V or 0/2 V ... 10 V, Signal splitter (1 input and 2 outputs), Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar millivolt sources, Output bipolar current and voltage sources, Accuracy 0.1 %, Configurable via DIP switches and potentiometer, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input current and voltage sources, Current and voltage output, Accuracy 0.1 %, Configurable by DIP switches, Connection via screw terminalspa
Interface for Power Bus, Supply current 3 A, LED status indication, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar current and voltage sources, Output bipolar current and voltage sources, Accuracy 0.1 %, Configurable via DIP switches and potentiometer, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar current and voltage sources, Relay contact output, Accuracy 0.1 %, Restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire and 3-wire transmitters and 2-wire current sources, Current and voltage output, Accuracy 0.1 %, Configurable by DIP switches, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire transmitters, Dual output 0/4 mA ... 20 mA, Signal splitter (1 input and 2 outputs), Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz ... 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire and 3-wire SMART transmitters and current sources, Output 0/4 mA ... 20 mA, Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors or AC/DC voltage sources, Relay contact output, Timer function, Configurable by DIP switches, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Thermocouple, RTD, potentiometer or mV input, Input for PTC thermistor, Current and voltage output, Line fault (LFD) and sensor burnout detection, Accuracy 0.1 %, Connection via screw terminalspa

Function: POWERBUS-SETH5.250

The power bus consists of a bus carrier with bus PCB. In addition, two end caps are attached to the power bus.

The component has conductors for power and for bus connections.

The component reduces wiring and maintenance costs because it eliminates the need to daisy-chain the wires. It also simplifies expansion – just snap in a new isolator when you’re ready to expand a system.

The component comes in 250 mm (10 inch) segments but can be cut to any size.

The New SC-System Signal Conditioner Line

Get to know the most compact solution for general-purpose applications!