Serviceline Industrial Sensors
Serviceline Explosion Protection

Cover for DIN Mounting Rail POWERBUS-COV.250

POWERBUS-COV.250
  • Cover for DIN mounting rail
  • Suitable for Power Bus
  • Standard length 250 mm (9.84 inch), simple to customize to application space
  • Packaging unit: 5 pieces

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  POWERBUS-COV.250

Product Description
Cover for 35 mm DIN mounting rail, length: 250 mm
Mechanical specifications
MaterialPolycarbonate
Massapprox. 100 g
Dimensions7.6 x 42.2 x 250 mm (0.3 x 1.66 x 9.84 inch)
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
General information
Packing unit5 item(s)

Associated Products: POWERBUS-COV.250

Accessory of
1-channel signal conditioner, 24 V DC supply, Input 2-wire transmitters, Input current and voltage sources, Dual output 0/4 mA ... 20 mA, 0/1 V ... 5 V or 0/2 V ... 10 V, Signal splitter (1 input and 2 outputs), Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar millivolt sources, Output bipolar current and voltage sources, Accuracy 0.1 %, Configurable via DIP switches and potentiometer, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input current and voltage sources, Current and voltage output, Accuracy 0.1 %, Configurable by DIP switches, Connection via screw terminalspa
Interface for Power Bus, Supply current 3 A, LED status indication, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Thermocouple, RTD, potentiometer or mV input, Input for PTC thermistor, Current and voltage output, Line fault (LFD) and sensor burnout detection, Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire and 3-wire transmitters and 2-wire current sources, Current and voltage output, Accuracy 0.1 %, Configurable by DIP switches, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire transmitters, Dual output 0/4 mA ... 20 mA, Signal splitter (1 input and 2 outputs), Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar current and voltage sources, Relay contact output, Accuracy 0.1 %, Restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar current and voltage sources, Output bipolar current and voltage sources, Accuracy 0.1 %, Configurable via DIP switches and potentiometer, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz ... 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input 2-wire and 3-wire SMART transmitters and current sources, Output 0/4 mA ... 20 mA, Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors or AC/DC voltage sources, Relay contact output, Timer function, Configurable by DIP switches, Connection via screw terminalspa

Function: POWERBUS-COV.250

The cover mounts onto the 35 mm DIN mounting rail. Thereby the DIN mounting rail will be protected from pollution. The contact with electrically conductive parts on DIN mounting rail will be prevented.

The New SC-System Signal Conditioner Line

Get to know the most compact solution for general-purpose applications!