Segment Protector for Cabinet Installation R-SP-E12
- 12 increased safety outputs (Ex e)
- Short circuit current limitation per output
- Segment Protector in Zone 1/Div. 2
- Instruments in Zone 1/Div. 1
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- High power on trunk and spurs
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of R-SP-E12
| Product Description | ||
|---|---|---|
| Segment Protector for Cabinet Installation | ||
| General specifications | ||
|---|---|---|
| Design / Mounting | Cabinet installation | |
| Fieldbus connection | ||
| Power dissipation | 250 mW | |
| Main cable (Trunk) | ||
| Rated voltage | 9 ... 32 V DC | |
| Outputs | ||
| Number of outputs | 12 | |
| Rated voltage | max. 32 V | |
| Rated current | max. 40 mA | |
| Short-circuit current | max. 52 mA | |
| Self current consumption | max. 9 mA | |
| Voltage drop main cable/outputs | max. 1.3 V | |
| Terminating resistor | selectable 100 Ω integrated | |
| Surge protection | trunk, spurs overvoltage protected if voltage exceeds typ. 39 V, max. 41 V | |
| Indicators/operating means | ||
| LED PWR | green: Fieldbus voltage > 10 V | |
| LED CHANNEL ERROR | red flashing: short-circuit | |
| LED COM | yellow: bus activity | |
| LED TERM ON | yellow: termination activated | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | EN 61326-1:2006 | |
| Standard conformity | ||
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | IEC 60529 | |
| Fieldbus standard | IEC 61158-2 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 95 % non-condensing | |
| Shock resistance | 15 g , 11 ms | |
| Vibration resistance | 5 g , 10 ... 150 Hz | |
| Mechanical specifications | ||
| Connection type | screw fixing | |
| Core cross section | max. 2.5 mm2 / AWG 12-24 | |
| Housing material | Polycarbonate | |
| Housing width | 216 mm | |
| Housing height | 100 mm | |
| Housing depth | 50 mm | |
| Degree of protection | IP20 | |
| Mass | 800 g | |
| Mounting | DIN rail mounting | |
| Coating | resin filled | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | PTB 04 ATEX 2100 X | |
| Marking |  II 2 G Ex e mb IIC T4 Gb |
|
| Maximum values | ||
| Rated voltage | ≤ 35 V | |
| Prospective short-circuit current | 100 A | |
| Directive conformity | ||
| Directive 94/9/EC | EN 60079-0:2012 , EN 60079-7:2007 , EN 60079-18:2009 | |
| International approvals | ||
| IECEx approval | IECEx PTB 05.0010X | |
| Approved for | Ex me II T4 | |
| Certificates and approvals | ||
| Marine approval | DNV A-14038 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 11.0 | 27242610 |
| ECLASS 10.0.1 | 27242610 |
| ECLASS 9.0 | 27242610 |
| ECLASS 8.0 | 27242601 |
| ECLASS 5.1 | 27242601 |
| ETIM 8.0 | EC001601 |
| ETIM 7.0 | EC001601 |
| ETIM 6.0 | EC001601 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Documents: R-SP-E12
Approvals+Certificates: R-SP-E12
Function: R-SP-E12
The R SP E12 Segment Protector is a device coupler that connects field instruments to the segment.
Flameproof (Ex d) field devices are connected to the trunk line via one output each. Trunk and spurs are certified increased safety (Ex e).
Short-circuit protection ensures proper operation of the segment in case of unwanted faults at the spur. Work on devices always requires a hot work permit. The integrated fieldbus terminator features high-availability design and is selectable.
Connectors are fixed screw terminals. Any grounding and shielding concept is possible based on FieldConnex enclosure solutions.
Customizable housings host one or more Segment Protectors for different output counts.
- News
- Service Level Agreements for ecom instruments
- Where to Buy
- Browse Literature
- Technologies
- Control System Solutions
- Download Technical Documents
- Press Releases
- International Trade Shows
The new LB/FB PROFINET gateways from Pepperl+Fuchs open the door for IIoT 4.0 applications in process industries.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.