Serviceline Industrial Sensors
Serviceline Explosion Protection

Not available for purchase

This product has been replaced.Go to replacement product OBT300-R200-2EP-IO-V1

Background suppression sensor MLV12-8-H-250-RT/65b/124/128

MLV12-8-H-250-RT/65b/124/128
  • Reliable detection of all surfaces, independent of color and structure
  • Minimal black-white difference
  • Ultra bright LEDs for power on and switching state
  • Flashing power on LED in case of short-circuit
  • Powerful push-pull output
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Multiple device installation possible, no mutual interference (no cross-talk)
  • Protection class II

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  MLV12-8-H-250-RT/65b/124/128

Product Description
Triangulation sensor with background suppression in a widely used standard housing, red light, 250 mm detection range, electrically adjustable, light/dark on, push-pull output, M12 plug
General specifications
Detection range20 ... 250 mm , adjustable
Detection range min.20 ... 50 mm
Detection range max.20 ... 250 mm
Adjustment range50 ... 250 mm
Light sourceLED
Light typemodulated visible red light , 660 nm
Black/White difference (6 %/90 %)10 % at 250 mm
Diameter of the light spot8 mm at Tw 250 mm
Angle of divergence1.5 °
Ambient light limit
Continuous light30000 Lux
Modulated light5000 Lux
Functional safety related parameters
MTTFd650 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green, flashes in case of short-circuit
Function indicator2 LEDs yellow
ON: object inside the scanning range
OFF: object outside the scanning range
Control elementspotentiometer for light/dark, detection range adjustment
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply current≤ 55 mA
Output
Switching typelight/dark on switchable
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, 0.2 A / 30 V DC
Switching voltagemax. 30 V DC
Switching currentmax. 0.2 A
Voltage drop≤ 2.5 V DC
Switching frequency1000 Hz
Response time0.5 ms
Conformity
Product standardEN 60947-5-2
Compliance with standards and directives
Standard conformity
Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Approvals and certificates
Protection classII, rated voltage ≤ 300 V AC with pollution degree 1-2 according to IEC 60664-1
UL approvalcULus
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Housing width41.5 mm
Housing height49 mm
Housing depth15 mm
Degree of protectionIP67
ConnectionMetal connector, M12, 5-pin, 90° rotatable
Material
HousingFrame: nickel plated, die cast zinc,
Laterals: glass-fiber reinforced plastic PC
Optical facePlastic pane
Mass60 g

Documents: MLV12-8-H-250-RT/65b/124/128

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF402 KB

CAD+CAE: MLV12-8-H-250-RT/65b/124/128

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS278 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP204 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: MLV12-8-H-250-RT/65b/124/128

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0916BPDF185 KB
Certificates
US CA UL General PurposeE87056LINK---

Associated Products: MLV12-8-H-250-RT/65b/124/128

Accessories
Mounting bracket for series MLV12 sensorsfa
Mounting bracket for series MLV12 sensorsfa
dove tail mounting clampfa
dove tail mounting clampfa
dove tail mounting clampfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa