Serviceline Industrial Sensors
Serviceline Explosion Protection

Background suppression sensor SBL-8-H-900-SL-V-Z-4871

SBL-8-H-900-SL-V-Z-4871
  • Diffused mode with background suppression
  • For installation between the rollers on a roller conveyor
  • Pull-in/Drop-out delay can be set
  • Minimal black-white difference
  • Degree of protection IP65
  • Can be connected in series

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  SBL-8-H-900-SL-V-Z-4871

Product Description
Congested track scanner, background suppression sensor, 900 mm adjustable detection range, infrared light, dark on, time relay, 1 PNP output, M12 plug and fixed cable with M12 socket
General specifications
Detection range40 ... 900 mm
Detection range min.40 ... 340 mm
Detection range max.40 ... 900 mm
Adjustment range340 ... 900 mm
Reference targetstandard white 200 mm x 200 mm
Light sourceIRED
Light typemodulated infrared light , 880 nm
Black/White difference (6 %/90 %)< 10 %
Diameter of the light spotapprox. 60 mm at detection range 900 mm
CascadabilityAt 20°C:
max. 38 sensors per line
Ambient light limitcontinuous light 30000 Lux , Fluorescent lamp 5000 Lux
Functional safety related parameters
MTTFd1100 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED yellow: lights when object is detected
Control elementsSensing range adjuster
Control elementsAdjuster for switch-off delay and switch-on delay
Electrical specifications
Operating voltage24 V DC -5% / +10%
Ripplemax. 10 %
No-load supply currentmax. 115 mA
Output
Switching typedark on
Signal output1 PNP, short-circuit protected, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 200 mA
Switching frequency100 Hz
Response time5 ms
On-delay0 ... 2000 ms
Off-delay0 ... 2000 ms
Pneumatic output2/3 way valve
Type of valvecurrentless closed
Operating pressure0 ... 7 bar (0 ... 101.5 psi)
Mediumair
Conformity
Product standardEN 60947-5-2
Compliance with standards and directives
Standard conformity
Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -1000 Hz, 10 g in each X, Y and Z directions
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 50 °C (-4 ... 122 °F)
Storage temperature-30 ... 60 °C (-22 ... 140 °F)
Mechanical specifications
Housing width18 mm
Housing height100 mm
Housing depth46 mm
Degree of protectionIP65
Connection4-pin, M12 x 1 connector ; Connecting cable with Socket, straight M12 x 1 ; Length: 2200 mm
Material
Housingplastic
Optical faceplastic lens
Massapprox. 200 g

Documents: SBL-8-H-900-SL-V-Z-4871

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF548 KB

Approvals+Certificates: SBL-8-H-900-SL-V-Z-4871

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0079APDF185 KB

Associated Products: SBL-8-H-900-SL-V-Z-4871

Accessories

Female cordset, M12, 4-pin, PVC cablefa

Female cordset, M12, 4-pin, PVC cablefa

Female cordset, M12, 4-pin, PUR cablefa

Female cordset, M12, 4-pin, PUR cablefa
Mounting bracket for sensors of SBL seriesfa
T-Distributor, M12 connector to M12 socket/connectorfa
Screwdriverfa

Function: SBL-8-H-900-SL-V-Z-4871

Sensors of the SBL serie are used to easily control material flow on roller conveyors in material handling and other branches.

The SBL series is a precise background suppression sensor according to the 3 element method. The sensor features superior background suppression and a very good ambient light immunity. Material and transport container of all colors and opacities are reliably detected.

The special design allows the sensor to be mounted between the rollers of a roller conveyor or any other conveying unit. Mounting between the rollers is easy and protects the sensor.