Serviceline Industrial Sensors
Serviceline Explosion Protection

Triangulation sensor (BGS) OBT600-R201-2EP-IO-0,3M-V1-L

OBT600-R201-2EP-IO-0,3M-V1-L
  • Medium design with versatile mounting options
  • DuraBeam Laser Sensors - durable and employable like an LED
  • Extended temperature range
    -40°C ... 60°C
  • High degree of protection IP69K
  • IO-link interface for service and process data

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  OBT600-R201-2EP-IO-0,3M-V1-L

Product Description
Laser diffuse mode sensor with adjustable background suppression
General specifications
Detection range40 ... 600 mm
Detection range min.40 ... 90 mm
Detection range max.40 ... 600 mm
Adjustment range90 ... 600 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourcelaser diode
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class1
Wave length680 nm
Beam divergence> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Pulse length3 µs
Repetition rateapprox. 13 kHz
max. pulse energy10.4 nJ
Black/White difference (6 %/90 %)< 5 % at 300 mm
Diameter of the light spotapprox. 2.5 mm at a distance of 600 mm
Angle of divergenceapprox. 0.3 °
Ambient light limitEN 60947-5-2 : 70000 Lux
Functional safety related parameters
MTTFd560 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicatorLED yellow:
constantly on - object detected
constantly off - object not detected
Control elementsLight-on/dark-on changeover switch
Control elementsSensing range adjuster
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply current< 15 mA at 24 V supply voltage
Protection classIII
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
Device profileIdentification and diagnosis
Smart Sensor type 2.4
Transfer rateCOM 2 (38.4 kBaud)
IO-Link Revision1.1
Min. cycle time2.3 ms
Process data witdhProcess data input 1 Bit
Process data output 2 Bit
SIO mode supportyes
Device ID0x111613 (1119763)
Compatible master port typeA
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
/Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Usage categoryDC-12 and DC-13
Voltage drop≤ 1.5 V DC
Switching frequency1650 Hz
Response time300 µs
Conformity
Communication interfaceIEC 61131-9
Product standardEN 60947-5-2
Laser safetyEN 60825-1:2014
Approvals and certificates
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
CCC approvalCCC approval / marking not required for products rated ≤36 V
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F) , fixed cable
-20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width15 mm
Housing height61.7 mm
Housing depth41.7 mm
Degree of protectionIP67 / IP69 / IP69K
Connection300 mm fixed cable with M12 x 1, 4-pin connector
Material
HousingPC (Polycarbonate)
Optical facePMMA
Massapprox. 55 g
Cable length0.3 m

Documents: OBT600-R201-2EP-IO-0,3M-V1-L

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / BeipackzettelALLPDF245 KB
Product information
Product information R10x and R20x Series Standard Housings - All Sensing ModesENGPDF1783 KB
Produktinformation Serien R10x und R20x Alle Funktionsprinzipien - In StandardgehäusenGERPDF1799 KB
Documents
Application reportENGPDF295 KB
ApplikationsberichtGERPDF298 KB

Approvals+Certificates: OBT600-R201-2EP-IO-0,3M-V1-L

Statements of complianceCertificate No.File TypeFile Size
Declaration of Conformity for simple apparatus / Konformitätserklärung für einfache BetriebsmittelDOC-3935PDF162 KB
Certificates
Canada USA UL Ordinary Location20170306-E87056PDF407 KB
Pepperl+Fuchs IO-Link Manufacturer DeclarationCERT-4525PDF212 KB

Software: OBT600-R201-2EP-IO-0,3M-V1-L

Device type managersRelease InfoFile TypeFile Size
IODD for OBT-R201 series / IODD für OBT-R201 seriesV1.00.000 / 2018-03-30ZIP771 KB

Associated Products: OBT600-R201-2EP-IO-0,3M-V1-L

Accessories

Female cordset, M12, 4-pin, PUR cablefa

Female cordset, M12, 4-pin, PUR cablefa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa