IO-Link Master ICE1-8IOL-G60L-V1D

Datasheet excerpt: Technical data of  ICE1-8IOL-G60L-V1D

Documents: ICE1-8IOL-G60L-V1D

CAD+CAE: ICE1-8IOL-G60L-V1D

Approvals+Certificates: ICE1-8IOL-G60L-V1D

Commissioning: ICE1-8IOL-G60L-V1D

Software: ICE1-8IOL-G60L-V1D

Associated Products: ICE1-8IOL-G60L-V1D

Accessory of
ENA58TL-S***-IO-Link Absolute encoders Absolut rotary encoder of the innovative Pure Line, Solid shaft, IO-Link Interface for process data, parameterization and diagnosis, Suitable for condition monitoring, Measuring range, direction of rotation and switching signals programmablefa
ENA36TL-R***-IO-Link Absolute encoders Absolut rotary encoder of the innovative Pure Line, Recessed hollow shaft, IO-Link Interface for process data, parameterization and diagnosis, Suitable for condition monitoring, Measuring range, direction of rotation and switching signals programmablefa
ENA36TL-S***-IO-Link Absolute encoders Absolut rotary encoder of the innovative Pure Line, Solid shaft, IO-Link Interface for process data, parameterization and diagnosis, Suitable for condition monitoring, Measuring range, direction of rotation and switching signals programmablefa
IQT1-FP-IO-V1 Read/write station HF read/write station with IO-Link in accordance with ISO 15693fa
IQT1-F61-IO-V1 Read/write station HF read/write station with IO-Link in accordance with ISO 15693fa
ENA58TL-R***-IO-Link Absolute encoders Absolut rotary encoder of the innovative Pure Line, Recessed hollow shaft, IO-Link Interface for process data, parameterization and diagnosis, Suitable for condition monitoring, Measuring range, direction of rotation and switching signals programmablefa
Matching System Components
IQT1-18GM-IO-V1 Read/write station HF read/write station with IO-Link in accordance with ISO 15693fa
Accessories
V1SD-G-ABG-PG9 Field-attachable male connector Cable connector, M12, 4-pin, D-coded, shielded, non pre-wiredfa
VAZ-V1-B3 Blind plug Blind plug for M12 socketsfa
V1S-T-V1 Y-distributor Y distributor, M12 connector on M12 socket/socketfa
V15L-G-2M-PUR-U-V15L-G Connection cable Cordset, M12 to M12, L-coded, 5-pin, PUR cablefa
V1SD-G-2M-PUR-ABG-V45-G Connection cable Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
V1SD-G-2M-PUR-ABG-V1SD-G Connection cable Ethernet bus cable, M12 to M12, PUR cable 4-pin, CAT5efa
V1-G-BK1M-PUR-A-T-V1-G Y connection cable Y connecting cable, M12 to 2xM12, 4-pin, PUR cablefa
V15L-G-BK Female cordset, field attachable Single-ended female cordset, M12, L-coded, field attachablefa
MH V1-SCREWDRIVER torque screwdriver torque screwdriver (0.6 Nm)fa
MH V1-BIT M12 plug-in cap plug-in cap M12fa
ICA-10DI6DO-G60A-IO I/O hub I/O hub with IO-Link interface for 10 digital inputs and 6 digital outputsfa
ICA-16DIO-G60AL-IO I/O hub I/O hub with IO-Link interface for 16 digital inputs/outputsfa
V15L-G-5M-PUR-U Female connector Single-ended female cordset, M12, L-coded, 5-pin, PUR cablefa

Function: ICE1-8IOL-G60L-V1D

The module is a multiprotocol fieldbus module with 4 type A and 4 type B IOLink master ports according to IO-Link standard V1.1.

The design in fully cast metal housing is resistant to mechanical damage and due to its high degree of protection to environmental influences.

The fieldbus module serves as an interface between the controller of a fieldbus system and the field level. Thanks to its multiprotocol capability, the fieldbus module supports the Ethernet communication protocols PROFINET and EtherNet/IP.

An L-coded M12 connector plug used for supplying power enables a current rating of up to 2 x 16 A. The inputs and outputs are equipped with A-coded M12 connector plugs. Connection to the fieldbus is achieved using a D-coded M12 connector plug.

The communication protocols are configured either manually via a rotary switch or automatically. Status information for each channel is displayed via LEDs as a diagnostic function. An integrated web server enables access to the fieldbus module. Information regarding the status of the module is also displayed and network parameters such as the IP address and subnet mask can be configured.